Search results for "fuel injectors":

Fuel Injectors for Honda Civic & Acura RSX – 410cc High Impedance This fuel injector kit is designed for Honda Civic and Acura RSX models equipped with SOHC and DOHC engines. It replaces OEM part number 16450-RWC-A01 and delivers 410cc flow rate for improved throttle response and fuel atomization. Key Benefits Restores fuel delivery precision and engine performance 100% flow matched and coil resistance tested Plug-and-play installation with included wiring adapters Compatible with K-series, B-series, D-series, and hybrid setups Fitment Compatibility 2005–2006 Acura RSX Base & Type-S 2.0L DOHC 2005 Honda Civic DX, EX, GX, HX, Hybrid, LX, Si – 1.3L/1.7L/2.0L SOHC/DOHC What's Included 4 x Fuel Injectors – 410cc High Impedance 4 x Wiring Harness Adapters Notes K-series engines: direct fit OBD2: plug and play with included adapters OBD1 & 9th Gen Civic: manual wiring required B/D-series: requires “top hat” adapters (not included) Tuning may be required depending on setup Fuel System Optimization Ideal for performance upgrades, engine swaps, or replacing worn injectors. These injectors improve fuel atomization, reduce misfires, and support higher horsepower builds with stable delivery.

Fuel Injector – Ford / Lincoln / Mercury V8 (1990–2005) This OEM-style Bosch fuel injector delivers precise fuel atomization for Ford, Lincoln, and Mercury V8 engines. Featuring a 4-hole spray pattern and high-impedance coil, it ensures smooth combustion and throttle response. Key Features OEM reference: 0280150943 / 0280150939 / F1ZE-A2B Connector type: EV1 Jetronic Spray pattern: 4-hole disc – 15° cone Coil type: High impedance – compatible with stock ECU Seal: Viton O-rings – fuel and heat resistant Filter: Basket filter at inlet Fitment Compatibility Ford: F-150 / F-250 / F-350 – 5.0L / 5.4L / 5.8L V8 (1990–2003) Mustang – 4.6L V8 (1996–2004) Expedition / Excursion – 4.6L / 5.4L V8 (1997–2005) E-Series Vans – E-150 / E-250 / E-350 – 4.6L / 5.4L / 5.8L / 7.5L V8 (1990–2003) Bronco – 5.0L / 5.8L V8 (1991–1996) Lincoln: Navigator – 5.4L V8 (1998–1999) Town Car – 4.6L V8 (1991–1994) Mercury: Grand Marquis – 4.6L V8 (1992–1997) Note: Only compatible with EV1-style injector connectors. Not suitable for EV6 or newer platforms. Package Includes 1 / 4 / 8 x Fuel Injectors (based on selection) Installation Notes Lubricate O-rings before installation Recommended to replace injectors as a matched set Idle calibration may be required for optimal performance Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

Fuel Injector for Acura RSX & Honda Civic – 410cc High Impedance This fuel injector replaces OEM part number 16450-RWC-A01 and is designed for select Acura and Honda platforms. It delivers 410cc flow rate and high impedance for stable fuel delivery and improved combustion efficiency. Key Benefits Restores OEM fuel atomization and cold start performance Flow matched and coil resistance tested for consistency High impedance design compatible with factory ECU Direct-fit replacement with plug-and-play wiring adapters Fitment Compatibility Acura RSX Base & Type-S 2.0L DOHC (2002–2006) Honda Civic DX/EX/LX/GX/HX/Hybrid 1.3L–1.7L SOHC (2001–2005) Honda Civic Si Hatchback 2.0L DOHC (2002–2005) What's Included 1 x Fuel Injector – OEM 16450-RWC-A01 1 x Wiring Harness Adapter Notes K-series engines: direct fit OBD2: plug and play with included adapter OBD1 & newer Civic: manual wiring required B/D-series engines require “top hat” adapters (not included) Tuning may be required depending on setup Fuel System Optimization Ideal for replacing clogged or underperforming injectors. This unit ensures consistent spray pattern, smoother idle, and improved fuel economy across multiple Honda/Acura platforms.

Fuel Injector for Honda Civic 1.8L – OEM 16450-RNA-A01 This fuel injector is designed for Honda Civic models equipped with the 1.8L R18A1 engine. It replaces OEM part number 16450-RNA-A01 and delivers precise fuel atomization and flow matching for optimal combustion and fuel efficiency. Key Benefits Restores OEM fuel delivery and cold start performance Flow matched and coil resistance tested for consistency High impedance design compatible with factory ECU Direct-fit replacement with no tuning required Fitment Compatibility Honda Civic 1.8L (2006–2011) – DX, LX, EX, EX-L, LX-S Honda Fit 1.5L (2007–2014) Honda CR-Z 1.5L Hybrid (2011–2014) What's Included 1 x Fuel Injector – OEM 16450-RNA-A01 Notes Recommended for replacement in sets of 4 for optimal balance Plug-and-play installation; no calibration required Estimated install time: 30–45 minutes Fuel System Restoration Ideal for resolving misfires, poor fuel economy, or rough idle caused by clogged or failing injectors. This OEM-grade injector ensures consistent spray pattern and reliable engine performance.

Fuel Injector – Nissan Maxima / G20 (1995–2000) This OEM-style fuel injector restores precise fuel delivery and combustion efficiency for Nissan VQ20DE and SR20DE engines. Designed to match factory flow rate and coil resistance, it ensures smooth throttle response and improved MPG. Key Features OEM reference: 16600-35U01 / A46-F13 Connector type: EV1 (Jetronic) Spray pattern: Single-hole pintle Coil type: High impedance – compatible with stock ECU Seal: Viton O-rings – fuel and heat resistant Fitment Compatibility Nissan Maxima A32: 1995–2000 – 2.0L V6 VQ20DE Infiniti G20: 1995–1999 – 2.0L I4 SR20DE Note: Only compatible with EV1-style injector connectors. Not suitable for later EV6 or side-feed platforms. Package Includes 1 x Fuel Injector – flow matched Installation Notes Lubricate O-rings before installation Recommended to replace injectors as a matched set Idle calibration may be required for optimal performance Shipping & Warranty Free shipping within USA  Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

Fuel Injector – LS3 / L99 / LS7 Platforms (2006–2015) This OEM Bosch fuel injector delivers precise fuel atomization for GM performance engines. Featuring a 4-hole spray pattern and high-impedance coil, it ensures smooth combustion and throttle response across LS3, L99, and LS7 platforms. Key Features OEM reference: Bosch 0280158051 / GM 12576341 / 1257641 Connector type: EV6 (USCAR) Spray pattern: 4-hole disc – 15° cone Flow rate: 42 lb/hr = 440 cc/min @ 43.5 PSI Coil type: High impedance – compatible with stock ECU Seal: Viton O-rings – fuel and heat resistant Fitment Compatibility Chevrolet Camaro: SS – 6.2L LS3 / L99 (2010–2015) Z/28 – 7.0L LS7 (2014) Chevrolet Corvette: Base – 6.2L LS3 (2008–2013) Z06 – 7.0L LS7 (2006–2013) 427 Convertible – 7.0L LS7 (2013) Pontiac G8 GXP: 6.2L LS3 (2009) Cadillac CTS: 6.2L LS3 (2012) Note: Only compatible with LS3 / L99 / LS7 engines using EV6 connectors. Not suitable for LS1 / LS2 / LS9 platforms. Package Includes 1 x Bosch Fuel Injector – flow matched Installation Notes Lubricate O-rings before installation Recommended to replace injectors as a matched set Idle calibration may be required for optimal performance Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

Flow Matched Fuel Injector – Honda Civic 1.8L (2006–2011) This high-impedance fuel injector is engineered to match OEM flow rates and coil resistance for Honda R18A 1.8L engines. It ensures precise fuel atomization, improved throttle response, and optimized MPG. Key Features OEM reference: 16450-RNA-A01 / FJ785 / FJ1045 High-impedance coil – compatible with factory ECU Viton O-rings – fuel and heat resistant Flow matched within ±2% tolerance Direct-fit replacement – no programming required Fitment Compatibility Honda Civic: 2006–2011 – 1.8L I4 (R18A) Honda CR-Z: 2011–2014 – 1.5L I4 Hybrid (LEA) Honda Fit: 2007–2014 – 1.5L I4 (L15A) Note: Not compatible with Si or K20/K24 engine variants Package Includes 1 x Fuel Injector – flow matched Installation Notes Disconnect battery before installation Lubricate O-rings and seat evenly into fuel rail Recommended to replace all injectors as a set Shipping & Warranty Free shipping within USA Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

42lb Bosch EV1 Racing Fuel Injector Set – GM V8 (1985–2004) This high-performance fuel injector set is designed for GM V8 platforms requiring increased fuel delivery. Ideal for mild to moderate performance builds, these injectors feature Bosch EV1 connectors and high-impedance coils for plug-and-play compatibility. Key Features Flow Rate: 42 lb/hr @ 43.5 PSI (440 cc/min) Impedance: High impedance – 12 Ohms Connector Type: Bosch EV1 (Jetronic) Nozzle: Single-hole disc with 15° spray cone Filter: Basket-style inlet filter Color: Green top – performance grade Fitment Compatibility Chevrolet Corvette: 1985–2004 Also fits: Camaro, Firebird, TransAm, Impala SS, GTO, Mustang GT/Cobra, Lightning Engine Platforms: TPI / LT1 / LS1 / LS6 / LQ4 / LQ9 / 5.0L / 5.7L / 6.0L V8 Note: Some models (e.g. 2003–2004 Cobra, GTO) require EV6 plug adapters OEM Reference Numbers 0280150558 / 0280155968 Replaces GM# 12580681 / 8125706160 Package Includes  Bosch EV1 Fuel Injectors – Green Top Installation Notes Direct fit for EV1-equipped vehicles Use new O-rings and lubricate before installation ECU recalibration recommended for optimal AFR Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 3-year product guarantee

Fuel Injector – Bosch Type | Jeep 4.0L I6 & Volvo 2.4L / 2.9L This high impedance fuel injector is designed for Jeep and Volvo vehicles equipped with multi-port fuel injection systems. It restores OEM spray pattern, flow rate, and combustion efficiency. Key Features 12-hole spray nozzle for fine atomization Flow rate: ~210cc/min @ 3 bar Resistance: ~14.5 Ohms Supports gasoline and E10 blends Pressure, leak, OHM, and spray pattern tested Includes new seals, filters, and O-rings Fitment Compatibility Jeep: Cherokee 4.0L I6 – 1989–1998 Grand Cherokee 4.0L I6 – 1993–1998 Wrangler 4.0L I6 – 1991–1995, 1997–1998 Comanche 4.0L I6 – 1987–1992 Volvo: 850 2.4L I5 – 1995–1997 960 / S90 / V90 2.9L I6 – 1995–1998 S70 / V70 2.4L I5 – 1998 Replaces OEM Part Numbers Bosch: 0280155702, 0280155746 Standard Motor Products: FJ583 What's Included 6 x Fuel Injector – Fully tested and ready to install Notes Direct replacement for Bosch-style MFI injectors Professional installation recommended Use new seals and torque to spec Performance Restoration Ideal for resolving misfires, fuel trim errors, or poor throttle response. This injector restores OEM spray pattern and flow rate for smooth, efficient combustion.

Fuel Injector Set – Toyota 1.8L 1ZZ-FE Platform (2000–2004) This flow-matched high impedance fuel injector set restores precise fuel delivery for Toyota 1.8L engines. Built to match OEM specs, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Numbers: 2320922040 / 232500D040 / 23209-0D040 / FJ415 / M548 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Toyota Corolla: 2000–2004 | 1.8L L4 | 1ZZ-FE Toyota Celica GT: 2000–2005 | 1.8L L4 Toyota Matrix: 2003–2006 | 1.8L L4 Toyota MR2 Spyder: 2000–2005 | 1.8L L4 Chevrolet Prizm: 2000–2002 | 1.8L L4 Pontiac Vibe: 2003–2004 | 1.8L L4 Note: Not compatible with turbocharged or GDI platforms Package Includes 4 × Fuel Injectors – OEM# 2320922040 / 232500D040 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

Fuel Injector – Toyota Corolla / Auris / Avensis (2003–2013) This OEM-style high impedance fuel injector restores precise fuel delivery for Toyota 1.8L engines. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Numbers: 23250-0D030 / 23209-0D030 / 0280156019 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Engine Platforms: Toyota 1ZZ-FE / 2ZR-FE | 1.8L I4 EU Market: Corolla SED/WG (ZZE12#), Corolla Verso, Auris, Avensis GR Market: Corolla CE120/140, NZE12#/141, ZZE14#/150 Asia / India: Corolla / Altis NZE120, ZZE12#, ZRE14# South America: Corolla ZZE12#, ZZE14#, ZRE14# South Africa: Corolla ZZE12#, ZZE150 US Market: Corolla ZRE14#, ZZE14# Note: Not compatible with 2.0L or hybrid platforms Package Includes 1 × Fuel Injector – OEM# 23250-0D030 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

High Impedance Fuel Injector Set – OEM-Compatible 16450-R70-A01 This fuel injector set includes 6 high-impedance injectors designed for Honda and Acura J-series V6 engines. Each unit delivers precise fuel atomization and flow rate to match OEM specifications, restoring performance and fuel efficiency. Key Benefits High impedance coil matches OEM resistance Precision flow rate for optimal combustion Improves throttle response and MPG Direct-fit replacement; no modification required Fitment Compatibility Honda Accord V6 (2008–2017) Honda Crosstour V6 (2010–2011) Acura MDX 3.7L (2008–2013) Acura TL 3.5L (2008–2014) Acura TSX V6 (2010–2014) Acura RL 3.7L (2008–2012) Acura RDX 3.5L (2013–2016) Acura ZDX 3.7L (2010–2013) Replaces OEM Part Numbers 16450-R70-A01 16450-R70-A01-6N FJ982 155-0459 195500-1100 842-12352 What's Included 6 x Fuel Injectors – OEM-Compatible Notes Sold as full set for V6 engine (6 injectors) Does not include O-rings or mounting hardware Not compatible with I4 or turbocharged platforms Estimated install time: 45–60 minutes Fuel System Restoration Ideal for resolving misfires, poor fuel economy, or injector imbalance. This set restores OEM-level spray pattern and flow rate, ensuring smooth engine operation and emissions compliance.

Fuel Injector Set – Toyota 1.5L 1NZ-FE Platform (2000–2005) This flow-matched high impedance fuel injector set restores precise fuel delivery for Toyota 1.5L engines. Built to match OEM specs, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Numbers: 23250-21020 / 23209-21020 / 2325021020 / 2320921020 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: 12-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Toyota Echo: 2000–2005 | 1.5L I4 | 1NZ-FE Toyota Prius: 2001–2009 | 1.5L Hybrid | 1NZ-FXE Scion xA / xB: 2004–2006 | 1.5L I4 Note: Not compatible with turbocharged or GDI platforms Package Includes 4 × Fuel Injectors – OEM# 23250-21020 / 23209-21020 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

Fuel Injector – Mitsubishi 2.0L / 2.4L MIVEC (2014–2019) This OEM-style high impedance fuel injector restores precise fuel delivery for Mitsubishi MIVEC engines. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Number: 1465A412 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Mitsubishi Lancer: 2015–2017 | 2.0L / 2.4L MIVEC Mitsubishi Outlander: 2014–2019 | 2.4L MIVEC Mitsubishi Outlander Sport: 2014–2019 | 2.0L MIVEC Mitsubishi Outlander PHEV: 2018–2019 | 2.4L Hybrid Note: Not compatible with turbocharged or diesel platforms Package Includes 1 × Fuel Injector – OEM# 1465A412 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

Fuel Injector – Toyota 3.4L V6 5VZ-FE (1995–2004) This OEM-style fuel injector restores precise fuel delivery for Toyota’s 3.4L V6 5VZ-FE engine. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Number: 23250-62040 / 23209-62040 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: 12-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Toyota Tacoma: 1995–2004 | 3.4L V6 5VZ-FE Toyota Tundra: 2000–2004 | 3.4L V6 5VZ-FE Toyota 4Runner: 1996–2002 | 3.4L V6 5VZ-FE Toyota Hilux Surf: 1995–2002 | 3.4L V6 Land Cruiser Prado 90: 1996–2002 | 3.4L V6 Note: Not compatible with 2.7L or 4.0L engines Package Includes 1 × Fuel Injector – OEM# 23250-62040 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance 🔧 Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation