Universal Fuel Primer Bulb – 6mm to 12mm Hose This hand-operated fuel primer bulb is designed for quick and efficient fuel system priming in marine, automotive, and small engine applications. Ideal for outboard motors, generators, ATVs, and agricultural equipment. Key Features Compatible with 6mm, 8mm, 10mm, and 12mm fuel lines Durable rubber bulb with corrosion-resistant aluminum connectors Built-in one-way valve for directional fuel flow Supports gasoline, diesel, biodiesel, and E85 Compact size: 15cm overall length Fitment Compatibility Marine: Outboard engines (Yamaha, Mercury, Suzuki, Honda), Jet Skis, small boats Automotive: Carbureted engines, fuel transfer systems, off-road vehicles Power Equipment: Generators, lawn mowers, pressure washers Agricultural: Tractors, sprayers, diesel pumps Package Includes 1 x Fuel Primer Bulb Installation Notes Connect inline between fuel tank and engine Ensure arrow direction matches fuel flow Prime until fuel reaches carburetor or injector Shipping & Warranty Ships from US warehouse Free shipping within USA & Australia 30-day return policy 2-year product guarantee

Fuel Injector – Mitsubishi Pajero Sport 6G72 3.0 V6 (1996–2008) This OEM-style high impedance fuel injector restores precise fuel delivery for Mitsubishi 6G72 V6 engines. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Numbers: 195500-4140 / MR507376 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Mitsubishi Pajero Sport: 1996–2008 Engine: 6G72 3.0L V6 SOHC / DOHC Note: Not compatible with GDI direct injection or turbocharged variants Package Includes 1 × Fuel Injector – OEM# 195500-4140 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

Fuel Injector – Mitsubishi 2.0L / 2.4L MIVEC (2014–2019) This OEM-style high impedance fuel injector restores precise fuel delivery for Mitsubishi MIVEC engines. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Number: 1465A412 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Mitsubishi Lancer: 2015–2017 | 2.0L / 2.4L MIVEC Mitsubishi Outlander: 2014–2019 | 2.4L MIVEC Mitsubishi Outlander Sport: 2014–2019 | 2.0L MIVEC Mitsubishi Outlander PHEV: 2018–2019 | 2.4L Hybrid Note: Not compatible with turbocharged or diesel platforms Package Includes 1 × Fuel Injector – OEM# 1465A412 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

1/8" BSPT to NPT Oil Pressure Sensor Tee Adapter – Turbo Feed Line This universal oil pressure tee fitting allows you to tap into your factory oil pressure port to supply a turbo feed line or install an aftermarket pressure gauge. CNC-machined from 304 stainless steel, it ensures leak-free performance and clean installation. Key Features Material: CNC 304 stainless steel – corrosion-resistant and high strength Inlet Thread: 1/8" BSPT Male Outlet Thread: 1/8" BSPT Female Center Tap Thread: 1/8" NPT Female Length: Overall 2.0" | Body 1.5" Color: Silver | Finish: Polished stainless Fitment Compatibility Honda: B/D/H/K Series engines Subaru: EJ20/EJ25 platforms Toyota: 4AGE, 2JZ, 1ZZ, 1NZ, 3S-GTE Hyundai / Mazda / Suzuki / Mitsubishi: Compatible with mechanical oil pressure senders Note: Not compatible with electronic oil pressure modules or CAN bus systems Package Includes 1 × Turbo Oil Feed Adapter Tee 1 × Sealing Washer Installation Notes Use PTFE tape or thread sealant for leak-free installation Mount directly to OE oil pressure sender port Recommended for turbo feed lines or aftermarket oil pressure gauges Restore Performance & Reliability Clean Integration: Avoids multi-fitting stacks and potential leaks Dual Functionality: Supports turbo oil feed and sensor tap simultaneously Durable Build: Withstands high pressure and engine bay heat Universal Fit: Compatible with most Japanese engine platforms Professional Appearance: CNC finish ensures clean, race-ready look

AN10 Flare Bulkhead Fitting – CNC Aluminum | Black Anodized This universal AN10 bulkhead fitting is CNC-machined from aircraft-grade 6061-T6 aluminum and anodized in black for corrosion resistance. Designed for high-performance fuel systems, it provides secure sealing and unrestricted flow for fuel, oil, or coolant applications. Key Features Size: AN10 | Thread: Flare | Type: Straight Bulkhead Material: 6061-T6 aluminum – CNC-machined for precision Finish: Black anodized – corrosion-resistant and durable Washer: Included – oil-resistant sealing washer Compatibility: Gasoline, diesel, alcohol, E85, coolant Fitment Applications Fuel cells, surge tanks, oil coolers, radiators Universal fit for race cars, street builds, off-road setups Recommended mounting hole: 11/16" (approx. 17.5mm) Package Includes 1 × AN10 Bulkhead Fitting 1 × Sealing Washer Installation Notes Drill mounting hole to recommended diameter Insert fitting through bulkhead and secure with nut Use PTFE tape or O-ring for enhanced sealing if needed Restore Performance & Reliability Leak-Free Seal: Prevents fluid seepage under pressure High Flow Efficiency: Radiused entry reduces turbulence and restriction Corrosion Protection: Anodized finish resists fuel and environmental damage Universal Fitment: Compatible with most AN10 hose ends and adapters Motorsport-Grade Build: Ideal for demanding fuel and oil systems

292PCS Body Retainer Clip Assortment – Multi-Vehicle Applications This OE-style fastener kit includes 292 pieces of commonly used body clips for Toyota, GM, Mazda, Isuzu, and more. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, insulation, hood seal, headlight/grille nuts Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, GM, Mazda, Isuzu, Honda, Mitsubishi, Nissan Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Hilux, Celica, MR2, Tercel, Land Cruiser, Tacoma, T100 GM: Chevrolet Nova, Prizm, Pontiac Vibe, Cadillac, GMC Mazda / Isuzu / Honda / Nissan / Mitsubishi: Compatible with select models Years: 1985–2022 Note: Not compatible with active grille shutters or electronic trim systems Package Includes 292 × Assorted Retainer Clips (20+ types) 1 × Screwdriver 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size (5mm–10mm) Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

146PCS Body Retainer Clip Assortment – Toyota Applications This OE-style fastener kit includes 146 pieces of commonly used body clips for Toyota vehicles. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, and insulation clips Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Mazda, Isuzu, GM platforms Fitment Compatibility Toyota: Camry, Corolla, Tacoma, Tundra, 4Runner, Celica, MR2, Hilux, Land Cruiser (1985–2022) Also fits: Mazda, Isuzu, GM (select clips) Note: Not compatible with active grille shutters or electronic trim systems Package Includes 146 × Assorted Retainer Clips 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

150PCS Universal Retainer Clip Kit – Multi-Vehicle Applications This complete fastener assortment includes 150 push-type rivet clips in 6 common sizes, ideal for repairing or replacing broken retainers on bumpers, fenders, doors, hoods, and interior panels. Designed for universal fitment across major vehicle brands. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: 6 sizes of push-type clips for 8mm / 10mm holes Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Honda, Mazda, Chevrolet, Ford, VW, Hyundai, and more Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Highlander, Prius, Sienna, Yaris Honda: Civic, Accord, CR-V, Odyssey, Fit Mazda: 3, 6, CX-5, CX-7 Chevrolet: Cruze, Malibu, Tahoe, Suburban Ford: Focus, Fusion, Mustang, Edge Hyundai / Kia / VW / BMW / Audi / Mercedes-Benz: Compatible with select models Note: Universal fitment for vehicles from 1985–2022. Not compatible with active grille shutters or electronic trim systems. Package Includes 150 × Push-Type Retainer Clips (6 sizes) 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

LS Swap Steam Port Adapter – 1-1/4" Hose Barb w/ 1/8" NPT This billet aluminum adapter allows you to conveniently add a steam port or sensor connection to your top radiator hose during an LS engine swap. Ideal for coolant venting or gauge installation. Key Features Material: CNC-machined T6061 billet aluminum Finish: Anodized silver – corrosion & heat resistant Port: Integrated 1/8" NPT female thread Function: Supports steam venting, coolant recirculation, or sensor installation Fitment: 1-1/4" outer diameter radiator hose Fitment Compatibility Engine Platforms: GM LS Gen III / Gen IV Examples: LS1, LS2, LS3, LS6, LQ4, LQ9, LM7, LY6 Note: Not compatible with LT series engines Package Includes 1 × Hose Barb Coupler with 1/8" NPT Port Installation Notes Cut radiator hose and insert adapter inline Use hose clamps to secure both ends Apply thread sealant or PTFE tape to NPT port before installing sensor or fitting Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 180-day product warranty

Standalone Wiring Harness – LS Vortec DBW (2003–2007) This plug-and-play standalone wiring harness is designed for LS-based Vortec engines with drive-by-wire throttle bodies and 4L60E automatic transmissions. Ideal for LS swap projects in muscle cars, trucks, and off-road builds. Key Features Supports LS 4.8L / 5.3L / 6.0L DBW engines (2003–2007) Compatible with 4L60E transmission only Includes OBD-II DLC port, MIL light, tach, speedo, TCC, and park/neutral wiring Delphi OEM connectors + TXL high-temp wire Sliding grommet seal for firewall pass-through Supports Multec injectors; EV6 adapters available upon request Fitment Compatibility Engine Platforms: LM7 – 5.3L LQ4 / LQ9 – 6.0L LR4 – 4.8L Transmission: 4L60E only Throttle: Drive-by-wire (DBW) only – not compatible with cable throttle Package Includes 1 x Standalone Wiring Harness – pre-terminated 1 x OBD-II DLC port 1 x Instruction Manual Installation Notes Requires 4-wire hookup: switched power, constant power, ground, fuel pump PCM mounting length: 4–5 ft from rear cylinder head Professional installation recommended Shipping & Warranty Free FedEx Express shipping (USA & Australia) Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

Brass Thread Adapter – 1/8 NPT Female to 1/8 BSPT Male This universal brass adapter fitting allows seamless connection between US-standard NPT female ports and UK/Euro BSPT male threads. Ideal for oil pressure sensors, fuel gauges, turbo boost lines, and coolant steam ports. Key Features Thread Type: 1/8" NPT (female) to 1/8" BSPT (male) Material: Industrial-grade brass – corrosion resistant Finish: Machined brass with anti-oxidation coating Pressure Rating: Up to 300 PSI Temperature Range: -40°C to 120°C Applications Oil pressure sensor adapters Fuel pressure gauge fittings Turbo boost sensor lines Coolant steam port adapters Universal fit for automotive, marine, and industrial use Package Includes 1 x Brass Adapter – 1/8 NPT Female to 1/8 BSPT Male Installation Notes Use thread sealant or PTFE tape for leak-free installation Do not overtighten – brass threads may deform Verify thread compatibility before installation Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

Front Differential Solenoid Valve – Mitsubishi 4WD (2007–2017) This OEM-style solenoid valve controls vacuum flow to engage or disengage the front differential in Mitsubishi 4WD systems. Designed for vehicles equipped with Super Select or Easy Select drivetrains. Key Features OEM reference: 8657A031 / K5T47776 Material: ABS plastic housing + zinc-coated steel core Ports: 2 vacuum ports – push-in & NPT compatible Connector: Standard Mitsubishi 2-pin plug Function: Controls front axle engagement via vacuum signal Fitment Compatibility Mitsubishi Pajero: NS / NT / NW / NX (2007–2017) Mitsubishi Triton: ML / MN / MQ (2007–2017) Mitsubishi Challenger: PB / PC (2007–2017) Mitsubishi Delica: D:5 / L300 / L400 (2007–2017) Note: Only compatible with vehicles equipped with Super Select 4WD or Easy Select systems. Not suitable for AWD-only or 2WD models. Package Includes 1 x Front Diff Solenoid Valve – OEM# 8657A031 Installation Notes Direct-fit replacement – plug & play Reconnect vacuum hoses and electrical plug Test 4WD engagement after installation Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

Rear Window Wiper Arm & Blade Set – Fits Honda CR-V 2007–2011 This rear wiper kit includes a 14" blade and matching wiper arm designed to restore rear visibility and OEM appearance. Compatible with Honda CR-V models from 2007 to 2011. Ideal for replacing faded, cracked, or malfunctioning rear wipers. Key Benefits Direct-fit replacement for rear wiper arm and blade Durable PBT plastic with 30% glass fiber for strength UV-resistant black paint finish prevents fading Precision-cut blade ensures streak-free wiping Fitment Compatibility Honda CR-V (2007–2011) Honda Fit / Jazz (2003+) Acura RDX (2007–2015) Acura MDX (2014–2015) Honda Pilot (2003–2008) Infiniti FX35 / FX45 / FX50 / EX35 / EX37 / Q50 / Q70 (2003–2015) Mitsubishi Ralliart Sportback (2010–2015) Saab 9-2x (2005–2006) Isuzu Axiom (2002–2004) Mazda 2 (2011–2014) What's Included 1 x Rear Wiper Arm (11.4" / 29cm) 1 x Rear Wiper Blade (14.1" / 36cm) Notes Requires removal of original wiper arm before installation Mounting screw not included No instruction manual included Professional installation recommended Rear Visibility Restoration Restore clear rear vision and OEM styling with this replacement wiper kit. Designed for harsh weather conditions, it ensures safe driving and clean rear glass in rain, snow, or dust.

Rear Catalytic Converter – Mitsubishi Outlander Sport / RVR 2.0L (2011–2012) This EPA-compliant rear catalytic converter is designed to restore emissions performance and eliminate exhaust restriction on Mitsubishi 2.0L platforms. Constructed with stainless steel tubing and heat shields for durability and thermal stability. Key Features Material: Stainless steel body with integrated heat shields Fitment: Direct bolt-on replacement – no cutting or welding required Sensor Ports: Pre- and post-catalyst O2 sensor bungs included Emissions: EPA 48-state legal – not CARB certified Function: Restores exhaust flow, reduces backpressure, supports OBDII readiness Fitment Compatibility Mitsubishi Outlander Sport: 2011–2012 Mitsubishi RVR: 2011–2012 Engine: 2.0L DOHC I4 (FWD & AWD) Note: Not compatible with California, New York, Colorado, or Maine emissions regulations Package Includes 1 × Rear Catalytic Converter (Part# 10H47095) Mounting accessories (if applicable) Installation Notes Professional installation recommended May require minor bracket or bushing adjustments depending on trim Ensure O2 sensors are properly torqued and sealed Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 2-year product guarantee

10" Android CarPlay Car Stereo – Mitsubishi Lancer EX (2008–2015) This touchscreen multimedia head unit is designed to upgrade the factory stereo in Mitsubishi Lancer EX models. It features Android CarPlay, built-in GPS, Bluetooth, WiFi, and supports steering wheel control and rear camera input. Key Features Operating System: Android CarPlay Screen: 10.1" HD capacitive touchscreen (1024×600) Connectivity: Bluetooth, WiFi, USB, AUX Navigation: Built-in GPS module + offline maps Audio: MP3 / WMA / FLAC / APE / WAV Video: Supports 1080P playback Supports: Steering wheel control, rear view camera input Fitment Compatibility Mitsubishi Lancer EX: 2008–2015 Trims: GLX / GLS / GT / EVO  Drive: FWD / AWD Note: Only compatible with vehicles equipped with 2DIN dashboard layout Package Includes 1 x Android Head Unit 1 x Power Harness 1 x GPS Antenna 1 x USB Cable 1 x User Manual Installation Notes Professional installation recommended May require dash kit or frame adapter for flush fitment Ensure compatibility with factory wiring before purchase Shipping & Warranty Free shipping within USA  Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee