Search results for "Throttle Body":

EGR Delete Block-Off TBI Plate Kit for Chevy/GMC V6/V8 TBI Engines This EGR delete plate is designed for Chevy and GMC vehicles equipped with throttle body injection (TBI) systems. It eliminates the EGR and idle air control valves for off-road or racing use, improving airflow and engine bay simplicity. Key Benefits Improves throttle response and reduces carbon buildup Precision CNC-machined from aircraft-grade 6061 T6 aluminum Black anodized finish for durability and corrosion resistance Compatible with a wide range of GM V6/V8 platforms from 1980–1995 Fitment Compatibility Chevy Camaro, Impala, C1500, C2500, C3500 (1980–1995) GMC C1500, C2500, C3500, Caballero, Vandura, Suburban (1980–1995) Also fits select Buick, Cadillac, Pontiac, Oldsmobile, Isuzu, Jeep models with GM TBI engines What's Included 1 x EGR delete plate 1 x gasket 2 x 5/16 x 18 stainless steel cap screws Notes For off-road or race use only; not legal for street use in some regions No tuning required for mechanical block-off; may trigger EML on some ECUs Estimated install time: 20–40 minutes Throttle Body Optimization Ideal for engine swaps, off-road builds, or emissions system simplification. This kit helps reduce intake turbulence and removes unused components for a cleaner engine bay.

EGR & Throttle Valve Delete Kit – Dodge Ram 6.7L Cummins (2010–2014) This complete emissions delete kit removes the factory EGR valve, cooler, and throttle valve actuator from your 6.7L Cummins engine. It improves airflow, lowers EGTs, and enhances throttle response for off-road and performance builds. Key Features Material: TIG-welded T304 stainless steel + CNC-machined billet aluminum Includes: Intake block-off plates, throttle valve delete tube, coolant bypass hose, support bracket, gaskets, bolts Ports: Pre-drilled for optional EGT probe installation Function: Eliminates EGR valve, cooler, and throttle valve actuator Design: Bolt-on fitment – no turbo, manifold, or up-pipe removal required Fitment Compatibility Dodge Ram 2500 / 3500: 2010–2014 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 1 × Intake Block-Off Plate 2 × Exhaust Block-Off Plates 1 × Throttle Valve Delete Tube 1 × Throttle Valve Gasket 1 × Coolant Hose + Connector 1 × Support Bracket 2 × Hose Clamps Mounting Hardware (bolts, nuts, washers) 2 × Gaskets Installation Notes Disconnect battery and drain coolant before installation Remove EGR valve, cooler, throttle valve, and associated tubing Install block-off plates and bypass hose Race tuning required to disable EGR and throttle valve functions Estimated install time: 2–3 hours ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads is a violation of federal and state laws Restore Performance & Reliability Improves Airflow: Removes intake restrictions for smoother combustion Lowers EGTs: Reduces exhaust gas temperatures by up to 150°F Boosts Throttle Response: Eliminates actuator lag and airflow obstruction Supports Tuning: Ideal for performance builds and towing applications

EGR & Throttle Valve Delete Kit – Dodge Ram 6.7L Cummins (2007–2009) This complete EGR and throttle valve delete kit removes restrictive emissions components from your 6.7L Cummins engine, improving airflow, lowering EGTs, and enhancing throttle response. Ideal for off-road and performance builds. Key Features Material: TIG-welded 304 stainless steel + CNC-machined billet aluminum Includes: Intake block-off plates, throttle valve delete, coolant bypass hose, support bracket, gaskets, bolts Ports: Pre-drilled for optional EGT probe installation Function: Eliminates EGR valve, cooler, and throttle valve actuator Design: Bolt-on fitment – no welding required Fitment Compatibility Dodge Ram 2500: 2007–2009 | 6.7L Cummins Turbo Diesel Dodge Ram 3500: 2008–2009 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 1 × EGR Valve Cooler Delete Kit 1 × Throttle Valve Delete Tube 1 × Throttle Valve Gasket 1 × Support Bracket 1 × Coolant Hose 2 × Hose Clamps 3 × Block-Off Plates Mounting Hardware (bolts, washers, nuts) Installation Notes Disconnect battery and drain coolant before installation Remove EGR valve, cooler, throttle valve, and associated tubing Install block-off plates and bypass hose Race tuning required to disable EGR and throttle valve functions Estimated install time: 2–3 hours Restore Performance & Reliability Improves Airflow: Removes intake restrictions for smoother combustion Lowers EGTs: Reduces exhaust gas temperatures by up to 150°F Boosts Throttle Response: Eliminates actuator lag and airflow obstruction Supports Tuning: Ideal for performance builds and towing applications

Throttle Position Sensor – Ford V8 / L6 / Diesel Platforms (1985–1997) This OE-style throttle position sensor (TPS) restores accurate throttle feedback for Ford engines. Compatible with multiple platforms, it helps resolve idle instability, poor acceleration, and shifting issues caused by faulty TPS signals. Key Features OEM Reference Numbers: TH44T, TPS228, EC1015, 9968, SS10426, 5S5157 Material: Automotive-grade ABS plastic – heat and corrosion resistant Connector Type: 3-pin plug | Mounting: Flange with dual bolt holes Voltage Range: 0.5V (closed) to 4.5V (wide open throttle) Function: Sends throttle position data to ECU for fuel and shift control Fitment Compatibility Ford Bronco: 1985–1995 | 5.0L V8 (VIN N), 5.8L V8 (VIN H), 4.9L L6 (VIN Y) Ford F-Series: F150 / F250 / F350 (1985–1997) | 5.0L / 5.8L / 4.9L / 6.9L Diesel Ford E-Series: E150 / E250 / E350 Vans (1986–1996) | 5.0L / 5.8L / 4.9L Ford Mustang: 1985 | 5.0L V8 (VIN M) Note: VIN digit reference: H = 5.8L, N = 5.0L, Y = 4.9L, 1 = 6.9L Diesel Package Includes 1 × Throttle Position Sensor – OEM# TH44T Installation Notes Remove old TPS from throttle body Install new sensor using factory bolts Calibrate voltage range using scan tool or multimeter Estimated install time: 15–30 minutes Restore Performance & Reliability Fixes Idle & Shift Issues: Resolves erratic RPM, poor throttle response, and harsh shifting Improves Fuel Efficiency: Restores ECU control over air-fuel ratio OEM Fitment: Matches factory geometry and electrical specs Durable Build: ABS housing resists heat, vibration, and engine bay contaminants

102mm Cathedral Port Intake Manifold – LS1 LS2 LS6 This high-performance aluminum intake manifold is designed for LS-based engines with cathedral port cylinder heads. Ideal for naturally aspirated or boosted setups requiring increased airflow and fuel delivery. Key Features Throttle body opening: 102mm Material: 3mm T6061 aluminum – TIG welded Height: 9.0 inches – approx. 3 inches taller than stock Fuel rails: ¾” high-flow aluminum with braided crossover line Vacuum ports: 3 integrated Gaskets & hardware: included Fitment Compatibility Engine Platforms: LS1 / LS6 – 5.7L / 346 CI LS2 – 6.0L / 364 CI 4.8L / 293 CI – LR4 5.3L / 325 CI – LM7, L59, L33 Vehicle Applications: Chevrolet Corvette – 1997–2007 Chevrolet SSR – 2005–2006 Chevrolet TrailBlazer SS – 2006–2009 Cadillac CTS-V – 2004–2007 Pontiac GTO – 2005–2006 Pontiac Firebird / Trans Am – 1998–2002 Saab 9-7X Aero – 2008–2009 Note: Only compatible with cathedral port heads. Not suitable for LS3 / L92 rectangle port configurations. Sensor Compatibility Supports LS1 / LS6 OEM TPS, IAC, MAP sensors LS2 may require TPS adapter harness Package Includes 1 x Intake Manifold 2 x Fuel Rails 1 x Braided Fuel Crossover Line Gaskets & Mounting Hardware Installation Notes Professional installation recommended Ensure proper torque and sensor alignment Use thread sealant on vacuum ports Performance Benefits Designed to reduce airflow restriction and evenly distribute intake charge across all cylinders. Ideal for racing, street performance, and LS swap builds. Shipping & Warranty Free shipping within USA & Australia Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

EGR Delete Block-Off Plate Kit – Ford F-Series / Ranger / Bronco (1983–1997) This CNC-machined EGR delete kit eliminates the exhaust gas recirculation system on select Ford engines, improving throttle response and reducing carbon buildup. Designed for off-road and race applications only. Key Features Material: Aircraft-grade 6061-T6 billet aluminum Finish: Precision CNC cut – warp-resistant and corrosion-proof Includes: 1 × EGR block-off plate, 1 × high-temp gasket, 2 × stainless steel pan-head bolts Function: Seals EGR port on throttle body or intake manifold Design: Direct bolt-on – no welding or tuning required Fitment Compatibility Ford F-150 / F-250 / F-350: 1983–1997 | 4.9L (300), 5.0L (302), 5.8L (351 Windsor) Ford Ranger / Bronco: 1983–1997 | V6 / V8 platforms Also Fits: Mustang, Taurus, E-Series Vans, Lincoln Mark VII, Mercury Cougar, and more Note: Not compatible with VGT turbo systems or electronic EGR modules Installation Notes Clean EGR port and mating surface before installation Use included gasket and bolts – torque to factory spec No ECU tuning required Estimated install time: 20–30 minutes ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves Airflow: Eliminates EGR restriction in intake path Reduces Carbon Buildup: Keeps throttle body and intake cleaner Enhances Throttle Response: Improves low-end torque and acceleration Durable Construction: Resists warping, corrosion, and heat fatigue

Description 100% Brand New,Never been used Eliminates soot build up and clogged EGR valves Coolant temperatures run cooler because they are not running through EGR cooler Hot exhaust gasses are not being re-routed back into the engine Coolant re-route hose included (no blocked off coolant hoses) Completely replaces EGR valve AND cooler Professional Installation is Highly Recommended (No Instruction Included) Fitment 2013-2018 Dodge Ram 2500 6.7L 408ci OHV L6 Cummins Diesel Turbo 2013-2018 Dodge Ram 3500 6.7L 408ci OHV L6 Cummins Diesel Turbo 2013-2018 Dodge Ram 4500 6.7L 408ci OHV L6 Cummins Diesel Turbo 2013-2018 Dodge Ram 5500 6.7L 408ci OHV L6 Cummins Diesel Turbo Package includes 1X EGR Block Off Plate with O-Rings 1X Front Block Off Plate 1X Rear Block Off Plate 1X Coolant Standpipe Adapter with O-ring 1X Locking Collar with Set Screws 1X Support Backage 1X Threaded Stud with Flange Nut and Stud Spacer 1X Coolant Hose 2X Pipe Clamps 3X 5/16" Hex Head Bolts 1X 1/4" Hex Head Bolts 4X Locking Nuts (1 - Small & 3-Large) 1X Throttle Valve Delete Tube 1X Gasket 4X Flange Bolts Notice Not for sale in the state of California  This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. Not for vehicles registered for use on the highway or street. Due to its high-performance nature, this product will void vehicle manufacturers warranty and can cause engine damage. Will require aftermarket tuning to turn off check engine light after installed. Direct Diesel Inc. is not responsible for misuse of its products. By installing this product, you release Direct Diesel Inc. of any and all liability associated with its use

EGR Valve Delete Kit – 6.7L Cummins Diesel (2007–2017) This EGR valve delete kit is designed for 2007–2017 Dodge Ram 2500 and 3500 trucks equipped with the 6.7L Cummins Turbo Diesel engine. It removes the EGR valve and throttle valve to improve airflow, reduce turbulence, and enhance engine performance for off-road applications. Key Benefits Eliminates EGR valve and throttle valve restrictions Improves turbo response and intake airflow Reduces soot buildup and exhaust backpressure Made of high-grade aluminum and silica gel for durability Simple bolt-on installation with included gasket and hardware Fitment Compatibility 2007–2010 Dodge Ram 2500 – 6.7L Cummins Diesel Turbo 2011–2017 Ram 2500 – 6.7L Cummins Diesel Turbo 2007–2010 Dodge Ram 3500 – 6.7L Cummins Diesel Turbo 2011–2017 Ram 3500 – 6.7L Cummins Diesel Turbo ⚠️ Not compatible with emissions-compliant highway use What's Included 1x Throttle valve delete tube 1x Gasket 4x Bolts Notes 100% brand new components Diameter: 85mm | Height: 90mm Requires DPF-delete capable tuner to prevent CEL/DTC codes For off-road or race use only – not legal for highway use in emissions-regulated areas Installation time: approx. 1–2 hours with basic hand tools Boost Reliability & Performance Removing the EGR and throttle valve systems helps prevent intake clogging, improves combustion efficiency, and enhances turbocharger performance. Ideal for off-road builds, towing applications, and diesel enthusiasts seeking long-term engine health.

Repair garages and middlemen can contact us to get wholesale prices   Description: 100% brand new and high quality Color: Black Replaces the stock valve & cooler system Designed to clean up the air in your intake, provides faster turbo spool, & lowers exhaust gas temperatures for better PERFORMANCE! Includes all installation hardware made from stainless steel and gaskets Completely pressure tested to ensure reliability & leak-free operation Fitment Guide: 2013 - 2019 DODGE RAM 2500 6.7L 408ci OHV L6 CUMMINS DIESEL TURBO 2013 - 2019 DODGE RAM 3500 6.7L 408ci OHV L6 CUMMINS DIESEL TURBO 2013 - 2019 DODGE RAM 4500 6.7L 408ci OHV L6 CUMMINS DIESEL TURBO 2013 - 2019 DODGE RAM 5500 6.7L 408ci OHV L6 CUMMINS DIESEL TURBO Package Includes: -EGR Block Off Plate w/ O-Rings -Front Block Off Plate -Rear Block Off Plate -Coolant Standpipe Adapter w/ O-ring -Locking Collar w/ Set Screws -Support Backage -Threaded Stud w/ Flange Nut and Stud Spacer -Coolant Hose -Pipe Clamps -Screws(As shown in the first picture)   In addition, we are looking for long-term cooperative auto parts agents. We are mainly engaged in auto parts of American models, lawn mower parts, ATV, UTV parts, RV parts, ship parts and tool goods. If you need other products, please contact us and we will give you unexpected prices.

DPF/CAT + EGR + Throttle Valve Delete Kit – Dodge Ram 6.7L Cummins (2013–2017) This complete emissions delete kit removes the restrictive diesel particulate filter (DPF), catalytic converter (CAT), EGR valve/cooler, and throttle valve actuator from your 6.7L Cummins engine. Designed for off-road and race use, it improves airflow, lowers EGTs, and enhances throttle response. Key Features Material: TIG-welded SUS409 stainless steel – 2mm wall thickness Pipe Diameter: 4" inlet – mandrel bent for smooth flow Function: Eliminates soot buildup, reduces regens, improves turbo spool Design: Includes coolant bypass hose – no blocked coolant lines Finish: Raw stainless – corrosion and heat resistant Fitment Compatibility Dodge Ram 2500 / 3500: 2013–2017 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 2 × Muffler Delete Pipes 2 × Pipe Clamps 1 × Hanger Bracket 3 × Bolts 1 × EGR Block-Off Plate with O-Rings 1 × Front Block-Off Plate 1 × Rear Block-Off Plate 1 × Coolant Standpipe Adapter with O-Ring 1 × Locking Collar with Set Screws 1 × Support Bracket 1 × Threaded Stud + Flange Nut + Spacer 1 × Coolant Hose 3 × Hex Head Bolts (5/16") 1 × Hex Head Bolt (1/4") 4 × Locking Nuts (1 Small + 3 Large) 1 × Throttle Valve Delete Tube + Gasket 4 × Flange Bolts Installation Notes Disconnect battery and drain coolant before installation Remove DPF, CAT, EGR valve/cooler, and throttle valve actuator Install block-off plates, coolant bypass, and delete pipe Race tuning required to disable emissions functions and avoid fault codes Estimated install time: 3–5 hours ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves Airflow: Removes intake and exhaust restrictions Lowers EGTs: Reduces exhaust gas temperatures by up to 200°F Boosts Throttle Response: Eliminates actuator lag and backpressure Supports Tuning: Ideal for performance builds and towing applications

Standalone Wiring Harness – LS Vortec DBW (2003–2007) This plug-and-play standalone wiring harness is designed for LS-based Vortec engines with drive-by-wire throttle bodies and 4L60E automatic transmissions. Ideal for LS swap projects in muscle cars, trucks, and off-road builds. Key Features Supports LS 4.8L / 5.3L / 6.0L DBW engines (2003–2007) Compatible with 4L60E transmission only Includes OBD-II DLC port, MIL light, tach, speedo, TCC, and park/neutral wiring Delphi OEM connectors + TXL high-temp wire Sliding grommet seal for firewall pass-through Supports Multec injectors; EV6 adapters available upon request Fitment Compatibility Engine Platforms: LM7 – 5.3L LQ4 / LQ9 – 6.0L LR4 – 4.8L Transmission: 4L60E only Throttle: Drive-by-wire (DBW) only – not compatible with cable throttle Package Includes 1 x Standalone Wiring Harness – pre-terminated 1 x OBD-II DLC port 1 x Instruction Manual Installation Notes Requires 4-wire hookup: switched power, constant power, ground, fuel pump PCM mounting length: 4–5 ft from rear cylinder head Professional installation recommended Shipping & Warranty Free FedEx Express shipping (USA & Australia) Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

Features:-Add a distinctive touch to your throttle body, designed for off-road use only when one or both controls have been eliminated for racing purposes.-Made from aerospace-grade aluminum for great lightness and enhanced durability. Features high hardness. Will not warp or deform.-Machined by latest-generation CNC technology to ensure high accuracy for a precise fit.Item Specifications:Condition: 100% Brand newMaterial: 6061-T6 Aluminum & Stainless Steel BoltProcessing: CNC-machinedPackage Included:1 X Plate, 2 X Bolts, 1 X Exhaust Cap, 1 X Gasket, Fitment for:For Ford F-150 5.4L 1999-2004For Ford F-150 5.4L Heritage 2004For Ford E-150 5.4L 1997-2014For Ford E-250 5.4L 1997-2014For Ford E-350 5.4L 6.8L 1997-2015 (gasoline)For Ford E-450 5.4L 6.8L 2000-2015 (gasoline)For Ford E-550 6.8L 2002-2003

Description 100% Brand New,Never been used Eliminates soot build up and clogged EGR valves Coolant temperatures run cooler because they are not running through EGR cooler Hot exhaust gasses are not being re-routed back into the engine Coolant re-route hose included (no blocked off coolant hoses) Completely replaces EGR valve AND cooler Professional Installation is Highly Recommended (No Instruction Included) Fitment 2013-2018 Dodge Ram 2500 6.7L 408ci OHV L6 Cummins Diesel Turbo 2013-2018 Dodge Ram 3500 6.7L 408ci OHV L6 Cummins Diesel Turbo 2013-2018 Dodge Ram 4500 6.7L 408ci OHV L6 Cummins Diesel Turbo 2013-2018 Dodge Ram 5500 6.7L 408ci OHV L6 Cummins Diesel Turbo Package includes 1X EGR Block Off Plate with O-Rings 1X Front Block Off Plate 1X Rear Block Off Plate 1X Coolant Standpipe Adapter with O-ring 1X Locking Collar with Set Screws 1X Support Backage 1X Threaded Stud with Flange Nut and Stud Spacer 1X Coolant Hose 2X Pipe Clamps 3X 5/16" Hex Head Bolts 1X 1/4" Hex Head Bolts 4X Locking Nuts (1 - Small & 3-Large) 1X Throttle Valve Delete Tube 1X Gasket 4X Flange Bolts Notice Not for sale in the state of California  This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. Not for vehicles registered for use on the highway or street. Due to its high-performance nature, this product will void vehicle manufacturers warranty and can cause engine damage. Will require aftermarket tuning to turn off check engine light after installed. Direct Diesel Inc. is not responsible for misuse of its products. By installing this product, you release Direct Diesel Inc. of any and all liability associated with its use

EGR Delete Kit – 6.7L Cummins Diesel (2013–2018) This EGR delete kit is engineered for 2013–2018 Dodge Ram trucks equipped with the 6.7L Cummins Turbo Diesel engine. It removes the EGR valve, cooler, and throttle valve to improve airflow, reduce soot buildup, and enhance engine performance for off-road applications. Key Benefits Eliminates EGR-related restrictions and carbon deposits Improves turbo response and combustion efficiency Includes throttle valve delete tube for unrestricted airflow Billet aluminum and stainless steel construction for durability Reduces exhaust backpressure and lowers engine temps Fitment Compatibility 2013–2018 Ram 2500 – 6.7L Cummins Diesel 2013–2018 Ram 3500 – 6.7L Cummins Diesel 2013–2018 Ram 4500 – 6.7L Cummins Diesel 2013–2018 Ram 5500 – 6.7L Cummins Diesel ⚠️ Not compatible with emissions-compliant highway use What's Included 1x EGR block-off plate with O-rings 1x Front block-off plate 1x Rear block-off plate 1x Coolant standpipe adapter with O-ring 1x Locking collar with set screws 1x Support bracket 1x Threaded stud with flange nut and spacer 1x Coolant hose 2x Pipe clamps 3x 5/16\" hex head bolts 1x 1/4\" hex head bolt 4x Locking nuts (1 small, 3 large) 1x Throttle valve delete tube 1x Gasket 4x Flange bolts Notes Professional installation recommended Requires DPF-delete capable tuner to prevent CEL/DTC codes For off-road or race use only – not legal for highway use in emissions-regulated areas Installation time: approx. 2–3 hours with basic hand tools Boost Reliability & Performance Removing the EGR and throttle valve systems helps prevent intake clogging, improves combustion efficiency, and enhances turbocharger performance. Ideal for off-road builds, towing applications, and diesel enthusiasts seeking long-term engine health.