Universal Fuel Primer Bulb – 6mm to 12mm Hose This hand-operated fuel primer bulb is designed for quick and efficient fuel system priming in marine, automotive, and small engine applications. Ideal for outboard motors, generators, ATVs, and agricultural equipment. Key Features Compatible with 6mm, 8mm, 10mm, and 12mm fuel lines Durable rubber bulb with corrosion-resistant aluminum connectors Built-in one-way valve for directional fuel flow Supports gasoline, diesel, biodiesel, and E85 Compact size: 15cm overall length Fitment Compatibility Marine: Outboard engines (Yamaha, Mercury, Suzuki, Honda), Jet Skis, small boats Automotive: Carbureted engines, fuel transfer systems, off-road vehicles Power Equipment: Generators, lawn mowers, pressure washers Agricultural: Tractors, sprayers, diesel pumps Package Includes 1 x Fuel Primer Bulb Installation Notes Connect inline between fuel tank and engine Ensure arrow direction matches fuel flow Prime until fuel reaches carburetor or injector Shipping & Warranty Ships from US warehouse Free shipping within USA & Australia 30-day return policy 2-year product guarantee

AN10 Flare Bulkhead Fitting – CNC Aluminum | Black Anodized This universal AN10 bulkhead fitting is CNC-machined from aircraft-grade 6061-T6 aluminum and anodized in black for corrosion resistance. Designed for high-performance fuel systems, it provides secure sealing and unrestricted flow for fuel, oil, or coolant applications. Key Features Size: AN10 | Thread: Flare | Type: Straight Bulkhead Material: 6061-T6 aluminum – CNC-machined for precision Finish: Black anodized – corrosion-resistant and durable Washer: Included – oil-resistant sealing washer Compatibility: Gasoline, diesel, alcohol, E85, coolant Fitment Applications Fuel cells, surge tanks, oil coolers, radiators Universal fit for race cars, street builds, off-road setups Recommended mounting hole: 11/16" (approx. 17.5mm) Package Includes 1 × AN10 Bulkhead Fitting 1 × Sealing Washer Installation Notes Drill mounting hole to recommended diameter Insert fitting through bulkhead and secure with nut Use PTFE tape or O-ring for enhanced sealing if needed Restore Performance & Reliability Leak-Free Seal: Prevents fluid seepage under pressure High Flow Efficiency: Radiused entry reduces turbulence and restriction Corrosion Protection: Anodized finish resists fuel and environmental damage Universal Fitment: Compatible with most AN10 hose ends and adapters Motorsport-Grade Build: Ideal for demanding fuel and oil systems

292PCS Body Retainer Clip Assortment – Multi-Vehicle Applications This OE-style fastener kit includes 292 pieces of commonly used body clips for Toyota, GM, Mazda, Isuzu, and more. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, insulation, hood seal, headlight/grille nuts Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, GM, Mazda, Isuzu, Honda, Mitsubishi, Nissan Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Hilux, Celica, MR2, Tercel, Land Cruiser, Tacoma, T100 GM: Chevrolet Nova, Prizm, Pontiac Vibe, Cadillac, GMC Mazda / Isuzu / Honda / Nissan / Mitsubishi: Compatible with select models Years: 1985–2022 Note: Not compatible with active grille shutters or electronic trim systems Package Includes 292 × Assorted Retainer Clips (20+ types) 1 × Screwdriver 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size (5mm–10mm) Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

146PCS Body Retainer Clip Assortment – Toyota Applications This OE-style fastener kit includes 146 pieces of commonly used body clips for Toyota vehicles. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, and insulation clips Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Mazda, Isuzu, GM platforms Fitment Compatibility Toyota: Camry, Corolla, Tacoma, Tundra, 4Runner, Celica, MR2, Hilux, Land Cruiser (1985–2022) Also fits: Mazda, Isuzu, GM (select clips) Note: Not compatible with active grille shutters or electronic trim systems Package Includes 146 × Assorted Retainer Clips 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

150PCS Universal Retainer Clip Kit – Multi-Vehicle Applications This complete fastener assortment includes 150 push-type rivet clips in 6 common sizes, ideal for repairing or replacing broken retainers on bumpers, fenders, doors, hoods, and interior panels. Designed for universal fitment across major vehicle brands. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: 6 sizes of push-type clips for 8mm / 10mm holes Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Honda, Mazda, Chevrolet, Ford, VW, Hyundai, and more Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Highlander, Prius, Sienna, Yaris Honda: Civic, Accord, CR-V, Odyssey, Fit Mazda: 3, 6, CX-5, CX-7 Chevrolet: Cruze, Malibu, Tahoe, Suburban Ford: Focus, Fusion, Mustang, Edge Hyundai / Kia / VW / BMW / Audi / Mercedes-Benz: Compatible with select models Note: Universal fitment for vehicles from 1985–2022. Not compatible with active grille shutters or electronic trim systems. Package Includes 150 × Push-Type Retainer Clips (6 sizes) 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

Ignition Coil + Spark Plug + Wire Set – GM LS V8 6.0L (2005–2007) This 8-piece ignition upgrade kit includes square-style UF413 coils, OE spark plugs, and high-performance plug wires. Designed for GM LS V8 engines, it restores spark energy and improves throttle response. Key Features Coil Type: UF413 / D510C square-style – not compatible with round-style UF414 / D514A Material: German copper windings, polyester rubber insulation Spark Plug: OE spec 41-962 / 19299585 – platinum tip Wire Set: 8mm silicone jacket – heat & EMI resistant Voltage: 12V – direct replacement Fitment Compatibility Chevrolet Corvette: 6.0L V8 (2005–2007) Also fits: Silverado, Tahoe, Trailblazer, Camaro, CTS, Escalade, GTO, Grand Prix, Hummer H2/H3, Pontiac G8, Saab 9-7x Engine Platforms: LS2 / LS3 / LQ4 / LQ9 / LY6 / L76 / L98 / LFA / LMG / L59 / L33 / L18 Note: Only compatible with square-style coil packs. Please verify before purchase. OEM Reference Numbers Coils: 12611424, 12570616, UF413, D510C, E893 Wires: 88862385, 12192195, 748UU, 12656210 Spark Plugs: 19299585, 41-962 Package Includes 8 × UF413 Square Ignition Coils 8 × Spark Plug Wires 8 × Spark Plugs Installation Notes Direct plug-and-play installation Use dielectric grease on boots for better sealing Torque spark plugs to factory spec Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 2-year product guarantee

LS Swap Steam Port Adapter – 1-1/4" Hose Barb w/ 1/8" NPT This billet aluminum adapter allows you to conveniently add a steam port or sensor connection to your top radiator hose during an LS engine swap. Ideal for coolant venting or gauge installation. Key Features Material: CNC-machined T6061 billet aluminum Finish: Anodized silver – corrosion & heat resistant Port: Integrated 1/8" NPT female thread Function: Supports steam venting, coolant recirculation, or sensor installation Fitment: 1-1/4" outer diameter radiator hose Fitment Compatibility Engine Platforms: GM LS Gen III / Gen IV Examples: LS1, LS2, LS3, LS6, LQ4, LQ9, LM7, LY6 Note: Not compatible with LT series engines Package Includes 1 × Hose Barb Coupler with 1/8" NPT Port Installation Notes Cut radiator hose and insert adapter inline Use hose clamps to secure both ends Apply thread sealant or PTFE tape to NPT port before installing sensor or fitting Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 180-day product warranty

Standalone Wiring Harness – LS Vortec DBW (2003–2007) This plug-and-play standalone wiring harness is designed for LS-based Vortec engines with drive-by-wire throttle bodies and 4L60E automatic transmissions. Ideal for LS swap projects in muscle cars, trucks, and off-road builds. Key Features Supports LS 4.8L / 5.3L / 6.0L DBW engines (2003–2007) Compatible with 4L60E transmission only Includes OBD-II DLC port, MIL light, tach, speedo, TCC, and park/neutral wiring Delphi OEM connectors + TXL high-temp wire Sliding grommet seal for firewall pass-through Supports Multec injectors; EV6 adapters available upon request Fitment Compatibility Engine Platforms: LM7 – 5.3L LQ4 / LQ9 – 6.0L LR4 – 4.8L Transmission: 4L60E only Throttle: Drive-by-wire (DBW) only – not compatible with cable throttle Package Includes 1 x Standalone Wiring Harness – pre-terminated 1 x OBD-II DLC port 1 x Instruction Manual Installation Notes Requires 4-wire hookup: switched power, constant power, ground, fuel pump PCM mounting length: 4–5 ft from rear cylinder head Professional installation recommended Shipping & Warranty Free FedEx Express shipping (USA & Australia) Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

Brass Thread Adapter – 1/8 NPT Female to 1/8 BSPT Male This universal brass adapter fitting allows seamless connection between US-standard NPT female ports and UK/Euro BSPT male threads. Ideal for oil pressure sensors, fuel gauges, turbo boost lines, and coolant steam ports. Key Features Thread Type: 1/8" NPT (female) to 1/8" BSPT (male) Material: Industrial-grade brass – corrosion resistant Finish: Machined brass with anti-oxidation coating Pressure Rating: Up to 300 PSI Temperature Range: -40°C to 120°C Applications Oil pressure sensor adapters Fuel pressure gauge fittings Turbo boost sensor lines Coolant steam port adapters Universal fit for automotive, marine, and industrial use Package Includes 1 x Brass Adapter – 1/8 NPT Female to 1/8 BSPT Male Installation Notes Use thread sealant or PTFE tape for leak-free installation Do not overtighten – brass threads may deform Verify thread compatibility before installation Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

102mm Cathedral Port Intake Manifold – LS1 LS2 LS6 This high-performance aluminum intake manifold is designed for LS-based engines with cathedral port cylinder heads. Ideal for naturally aspirated or boosted setups requiring increased airflow and fuel delivery. Key Features Throttle body opening: 102mm Material: 3mm T6061 aluminum – TIG welded Height: 9.0 inches – approx. 3 inches taller than stock Fuel rails: ¾” high-flow aluminum with braided crossover line Vacuum ports: 3 integrated Gaskets & hardware: included Fitment Compatibility Engine Platforms: LS1 / LS6 – 5.7L / 346 CI LS2 – 6.0L / 364 CI 4.8L / 293 CI – LR4 5.3L / 325 CI – LM7, L59, L33 Vehicle Applications: Chevrolet Corvette – 1997–2007 Chevrolet SSR – 2005–2006 Chevrolet TrailBlazer SS – 2006–2009 Cadillac CTS-V – 2004–2007 Pontiac GTO – 2005–2006 Pontiac Firebird / Trans Am – 1998–2002 Saab 9-7X Aero – 2008–2009 Note: Only compatible with cathedral port heads. Not suitable for LS3 / L92 rectangle port configurations. Sensor Compatibility Supports LS1 / LS6 OEM TPS, IAC, MAP sensors LS2 may require TPS adapter harness Package Includes 1 x Intake Manifold 2 x Fuel Rails 1 x Braided Fuel Crossover Line Gaskets & Mounting Hardware Installation Notes Professional installation recommended Ensure proper torque and sensor alignment Use thread sealant on vacuum ports Performance Benefits Designed to reduce airflow restriction and evenly distribute intake charge across all cylinders. Ideal for racing, street performance, and LS swap builds. Shipping & Warranty Free shipping within USA & Australia Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

EGR Removal Blanking Kit for 1.9 & 2.4 CDTi/TiD/JTDM Engines This EGR delete kit is designed for Opel, Saab, Fiat, Alfa Romeo, and Lancia vehicles equipped with 1.9 or 2.4 CDTi/TiD/JTDM engines to eliminate the factory EGR system, reduce carbon buildup, and improve throttle response. Key Benefits Improves engine efficiency and reduces soot accumulation Made from high-grade aluminum alloy with stainless steel components Includes all necessary hardware for easy installation Compatible with multiple platforms across GM, Fiat, and Alfa groups Fitment Compatibility Opel Astra H, Signum, Vectra C, Zafira B – 1.9 CDTi (2004–2011) Saab 9-3, 9-5 – 1.9 TiD (2004–2011) Fiat Stilo, Croma – 1.9 JTDM (2004–2011) Alfa Romeo 147, 156, 159, 166 – 1.9 & 2.4 JTDM (2004–2011) Lancia Thesis – 2.4 JTDM (2004–2011) What's Included 1 x EGR blanking plate with gasket 1 x stainless steel coolant pipe 1 x hose clamp Notes Requires EGR cheat simulator to avoid EML errors For off-road or race use only; not legal for street use in some regions Estimated install time: 30–60 minutes Performance & Application Ideal for diesel performance builds, track use, or preventative maintenance. Helps maintain cleaner intake paths and reduces long-term wear on turbocharged engines.

Rear Window Wiper Arm & Blade Set – Fits Honda CR-V 2007–2011 This rear wiper kit includes a 14" blade and matching wiper arm designed to restore rear visibility and OEM appearance. Compatible with Honda CR-V models from 2007 to 2011. Ideal for replacing faded, cracked, or malfunctioning rear wipers. Key Benefits Direct-fit replacement for rear wiper arm and blade Durable PBT plastic with 30% glass fiber for strength UV-resistant black paint finish prevents fading Precision-cut blade ensures streak-free wiping Fitment Compatibility Honda CR-V (2007–2011) Honda Fit / Jazz (2003+) Acura RDX (2007–2015) Acura MDX (2014–2015) Honda Pilot (2003–2008) Infiniti FX35 / FX45 / FX50 / EX35 / EX37 / Q50 / Q70 (2003–2015) Mitsubishi Ralliart Sportback (2010–2015) Saab 9-2x (2005–2006) Isuzu Axiom (2002–2004) Mazda 2 (2011–2014) What's Included 1 x Rear Wiper Arm (11.4" / 29cm) 1 x Rear Wiper Blade (14.1" / 36cm) Notes Requires removal of original wiper arm before installation Mounting screw not included No instruction manual included Professional installation recommended Rear Visibility Restoration Restore clear rear vision and OEM styling with this replacement wiper kit. Designed for harsh weather conditions, it ensures safe driving and clean rear glass in rain, snow, or dust.