Search results for "Suspension":

US shipment, same day delivery, 5-7 days delivery Features* No more shuddering or dropping cylinders* Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM system* No tools needed; simply remove to uninstall* All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads* Safe and reversible: leaves no trace; unplug it to return to factory settings* Fits all V6 and V8 General Motors AFM vehicles, including cars, trucks, and SUVsHow to Delete or Disable AFM on GM/Chevy EnginesThere are two ways to disable or delete Active Fuel Management on your GM or Chevy Gen IV LS or LS-based Vortec engine—one is to install an AFM Disabler, and the second is to install an AFM Delete Kit. Here’s what you need to know:1. Install an AFM Delete KitAn AFM Delete Kit is recommended when an AFM lifter fails or when doing performance upgrades. It replaces the AFM components with standard parts.When installing an AFM delete kit:You MUST upgrade to a non-AFM camshaft because the cam lobes in the four AFM cylinders are ground differently. The engine will have 25 less pounds of compression in those four cylinders which can result in a misfire code.You will need to turn off the AFM system using a computer programmer or custom tuning.It’s a little more work, but it’s recommended that you plug the pressure relief valve in the oil pan.It is also recommended that you switch to a standard-volume oil pump.2. Install an AFM DisablerAn AFM Disabler is an electronic device that plugs into the OBD-II port, under the dashboard. It prevents the computer from switching over to four-cylinder mode. It’s a simple and effective way to turn off the AFM system and provides the added bonus of improving exhaust sound.NOTE: A disabler device should ONLY be used if the valvetrain is in good working order.Engines with AFM use a high-volume oil pump. When you eliminate the AFM system, the extra oil is no longer needed. Excess oil will be pushed out of the pressure relief valve into the oil pan. This will spray oil on the bottom of the cylinder walls which can cause oil burning, especially in high-rpm engines.Which Option is Best—a Disabler or Delete Kit?As long as a lifter hasn’t started to fail, you can get by with a less-expensive disabler as preventative maintenance. If a lifter has already started to fail, an AFM delete kit and non-AFM components are the way to go.…NOTE: If you were in a situation where you’ve installed the AFM delete kit, but don’t have access to a prFits for:BUICK ENCLAVE 3.6 V6 2008BUICK LACROSSE 3.6 V6 2016-2018BUICK LACROSSE 5.3 V8 2006-2009BUICK LACROSSE CXS 3.6 V6 2005-2008BUICK PARK AVENUE (CHINA) 3.6 V6 2007-2009BUICK RAINIER5.3 V8 2005-2009BUICK REGAL GS 3.6 V6 2018BUICK RENDEZVOUS 3.9 V6 2006-2007BUICK RENDEZVOUS CXL/Ultra 3.6 V6 2004-2007BUICK TERRAZA 3.9 V6 2006-2008CADILLAC ATS 3.6 V6 2012-2019CADILLAC CT6 3.6 V6 2016-2018CADILLAC CT6 (Non Hybrid) 3.0 V6 2016-2018CADILLAC CTS 6.2 V6 2004-2019CADILLAC CTS 3.6 V6 2004-2018CADILLAC ESCALADE 6.2 V8 2010-2018CADILLAC ESCALADE ESV6.2 V8 2010-2018CADILLAC ESCALADE EXT6.2 V8 2010-2018CADILLAC SLS (China)3.6 V6 2007-2009CADILLAC SRX 3.6 V6 2004-2009CADILLAC STS3.6 V6 2005-2007CADILLAC XT5 3.6 V6 2016-2019CADILLAC XTS 3.6 V6 2013-2018CHEVROLET AVALANCHE 5.3 V8 2007-2013CHEVROLET AVALANCHE 6.0 V8 2007-2009CHEVROLET AVALANCHE 6.2 V8 2010-2013CHEVROLET CAMARO 3.6 V6 2016-2018CHEVROLET CAMARO 6.0 V8 2010CHEVROLET CAMARO 6.2 V8 2011-2020CHEVROLET CAPRICE PPV 6.0 V8 2011-2018CHEVROLET COLORADO 3.6 V6 2015-2020CHEVROLET CORVETTE 6.2 V8 2012-2018CHEVROLET EQUINOX SPORT 3.6 V6 2008-2009CHEVROLET IMPALA 3.9 V6 2007CHEVROLET IMPALA 5.3 V8 2006-2009CHEVROLET MALIBU 3.6 V6 2008-2012CHEVROLET MALIBU 3.9 V6 2006-2007CHEVROLET MALIBU MAX 3.9 V6 2006CHEVROLET MONTE CARLO 5.3 V8 2006-2008CHEVROLET SILVERADO 1500 4.3 V6 2014 2018CHEVROLET SILVERADO 1500 5.3 V8 2010-2020CHEVROLET SILVERADO 1500 6.0 V8 2007-2009CHEVROLET SILVERADO 1500 6.2 V8 2010-2020CHEVROLET SS 6.2 V8 2014-2018CHEVROLET SUBURBAN 4.3 V6 2015-2018CHEVROLET SUBURBAN 5.3 V8 2007-2020CHEVROLET SUBURBAN 6.0 V8 2007-2009CHEVROLET SUBURBAN 6.2 V8 2010-2020CHEVROLET TAHOE 4.3 V6 2015-2018CHEVROLET TAHOE 5.3 V8 2007-2020CHEVROLET TAHOE 6.2 V8 2010-2020CHEVROLET TRAILBLAZER 5.3 V8 2005-2009CHEVROLET Traverse 3.6 V6 2018CHEVROLET UPLANDER 3.9 V6 2006-2008GMC ACADIA 3.6 V6 2007-2008GMC ACADIA 3.6 V6 2017-2018GMC CANYON 3.6 V6 2015-2009GMC ENVOY 5.3 V8 2005-2009GMC SIERRA 1500 4.3 V6 2014-2018GMC SIERRA 1500 5.3 V8 2010-2020GMC SIERRA 1500 6.0 V8 2007-2009GMC SIERRA 1500 6.2 V8 2010-2020GMC SIERRA DENALI 6.2 V8 2010-2018GMC YUKON 4.3 V6 2015-2018GMC YUKON 5.3 V8 2007-2018GMC YUKON 6.0 V8 2007-2009GMC YUKON 6.2 V8 2010-2018GMC YUKON XL 5.3 V8 2010-2018GMC YUKON DENALI6.2 V8 2010-2018GMC YUKON DENALI XL 6.2 V8 2010-2018HOLDEN RODEO/COLORADO 3.6 V6 2006-2011HOLDEN VE COMMODORE OMEGA 3.6 V6 2006-2009HOLDEN VZ CALAIS SV6 3.6 V6 2004-2007HOLDEN VZ COMMODORE 3.6 V6 2004-2007HOLDEN WL STATESMAN 3.6 V6 2004-2007HOLDEN WM STATESMAN/CAPRICE 3.6 V6 2006-2009IZUZU ASCENDER 5.3 V8 2005-2009PONTIAC G6 3.9 V6 2007PONTIAC G6 GTP 3.6 V6 2007PONTIAC G6 GXP 3.6 V6 2008-2009PONTIAC G8 3.6 V6 2008-2009PONTIAC G8 GT 6.0 V8 2009-2010PONTIAC G8 GT 6.2 V8 2010PONTIAC GRAND RPRIX 3.9 V6 2007PONTIAC GRAND RPRIX 5.3 V8 2005-2008PONTIAC MONTANA 3.9 V6 2007-2008PONTIAC MONTANA SV6 3.9 V6 2006-2008PONTIAC TORRENT GXP 3.6 V6 2008-2009SAAB 9-7X 5.3 V8 2005-2009saturn AURA XR 3.6 V6 2007-2009saturn OUTLOOK XE 3.6 V6 2007-2008saturn OUTLOOK XR 3.6 V6 2007-2008saturn RELAY 3.9 V6 2006-2008saturn VUE XR / Red Line 3.6 V6 2008-2009SUZUKI XL2 3.6 V6 2007-2009

Range Technology AFM Disabler RA003 – Plug & Play for GM V6/V8 This AFM disabler module by Range Technology instantly disables Active Fuel Management (AFM) on GM vehicles equipped with V6 or V8 engines. Simply plug it into your OBD-II port and enjoy full-time power without cylinder deactivation. Key Benefits Eliminates AFM shuddering and cylinder dropouts Improves throttle response and exhaust tone Plug & play – no tools or programming required Safe and reversible – unplug to restore factory settings Ideal for towing, off-road, and heavy load conditions Fitment Compatibility Compatible with GM vehicles equipped with AFM (Active Fuel Management) systems: Chevrolet Silverado / Suburban / Tahoe / Avalanche (2007–2020) GMC Sierra / Yukon / Yukon XL / Denali (2007–2020) Cadillac Escalade / CTS / XT5 / XTS / SRX (2004–2019) Buick Enclave / LaCrosse / Rainier / Regal GS (2005–2018) Pontiac G8 / Grand Prix (2005–2010) Pontiac Torrent / Montana – select V6/V8 models with AFM Saturn Outlook / Aura XR – equipped with 3.6L AFM V6 Hummer H2 – 6.0L/6.2L V8 with AFM; H3 – only 5.3L V8 supports AFM Isuzu Ascender – 5.3L V8 models with AFM What's Included 1 x Range Technology AFM Disabler RA003 Quick-start guide Notes Only use if valvetrain is in good condition Unplug to revert to factory AFM settings Not a tuning device – does not alter ECU programming Why Disable AFM? AFM systems deactivate cylinders to improve fuel economy, but often cause vibration, oil consumption, and reduced performance. This disabler keeps all cylinders active for smoother driving and better power delivery.

EGR Simulator Eliminator Plug – Ford F-Series & Bronco (1986–1995) This EGR simulator plug is designed for 1986–1995 Ford F150, F250, and Bronco models equipped with 2.8L, 4.9L, 5.0L, 5.8L, or 7.5L gasoline engines. It plugs directly into the stock EGR valve wiring harness and sends a “closed” signal to the ECU, keeping the Check Engine Light (CEL) off while allowing other diagnostic codes to remain functional. Key Benefits Prevents EGR-related CEL codes (e.g., Code 33 / 332) Maintains ECU readiness for other engine diagnostics Plug-and-play installation with factory-style locking connector Ideal for off-road builds, race applications, and EGR-disabled setups No adverse effects on engine performance or fuel delivery Fitment Compatibility Ford F-150 – 1986–1995 (2.8L, 4.9L, 5.0L, 5.8L, 7.5L) Ford F-250 – 1986–1995 (same engines) Ford Bronco – 1986–1995 (same engines) Also fits select 1986–1995 Ford Mustang models (2.3L / 5.0L) ⚠️ For off-road or race use only. Not legal for highway use in emissions-regulated areas What's Included 1× EGR Simulator Plug Notes Does not include block-off plate (sold separately) Installation requires disconnecting EGR valve harness and inserting simulator until locked Secure with zip tie or tape to prevent vibration-related disconnection After installation, Code 33/332 may appear during scan but will not trigger CEL This is not an EGR defeat device—it does not disable EGR valve functions Restore Diagnostic Clarity & Engine Efficiency Keep your CEL off and your engine diagnostics clean with this plug-and-play EGR simulator. Ideal for off-road enthusiasts, tuners, and anyone running a non-EGR setup on classic Ford platforms.

EGR & Throttle Valve Delete Kit – Dodge Ram 6.7L Cummins (2007–2009) This complete EGR and throttle valve delete kit removes restrictive emissions components from your 6.7L Cummins engine, improving airflow, lowering EGTs, and enhancing throttle response. Ideal for off-road and performance builds. Key Features Material: TIG-welded 304 stainless steel + CNC-machined billet aluminum Includes: Intake block-off plates, throttle valve delete, coolant bypass hose, support bracket, gaskets, bolts Ports: Pre-drilled for optional EGT probe installation Function: Eliminates EGR valve, cooler, and throttle valve actuator Design: Bolt-on fitment – no welding required Fitment Compatibility Dodge Ram 2500: 2007–2009 | 6.7L Cummins Turbo Diesel Dodge Ram 3500: 2008–2009 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 1 × EGR Valve Cooler Delete Kit 1 × Throttle Valve Delete Tube 1 × Throttle Valve Gasket 1 × Support Bracket 1 × Coolant Hose 2 × Hose Clamps 3 × Block-Off Plates Mounting Hardware (bolts, washers, nuts) Installation Notes Disconnect battery and drain coolant before installation Remove EGR valve, cooler, throttle valve, and associated tubing Install block-off plates and bypass hose Race tuning required to disable EGR and throttle valve functions Estimated install time: 2–3 hours Restore Performance & Reliability Improves Airflow: Removes intake restrictions for smoother combustion Lowers EGTs: Reduces exhaust gas temperatures by up to 150°F Boosts Throttle Response: Eliminates actuator lag and airflow obstruction Supports Tuning: Ideal for performance builds and towing applications

Details:The OEM water in fuel sensor screws directly into the into the Duramax Filter Delete bowl so no check engine lights will appear.Note: This system must be used with another form of fuel filtration.Includes:FASS Duramax Filter Delete BowlO-ringBrass plugInstallation ManualApplications:2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 Chevy Silverado 6.6L Duramax Diesel2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 Chevy Kodiak 6.6L Duramax Diesel2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 GMC Sierra 6.6L Duramax Diesel2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 GMC Topkick 6.6L Duramax Diesel

Swag CCV Open Breather Kit – Dodge Ram 6.7L Cummins (2007.5–2017) This open breather CCV reroute kit converts the factory closed crankcase ventilation system to an external vent, eliminating oil vapor buildup in the turbo inlet and intercooler. Ideal for high-blow-by engines and performance builds. Key Features Material: High-temp silicone hose + CNC billet aluminum plug Includes: Reusable air filter, 90° vent hose, stainless steel clamps Function: Redirects crankcase gases away from intake system Design: Retains OEM CCV filter for emissions compliance Finish: Black anodized plug + clear silicone tubing Fitment Compatibility Dodge Ram 2500 / 3500: 2007.5–2017 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 1 × Reusable air filter 1 × Silicone vent hose (90° bend) 1 × CNC billet aluminum plug 4 × Stainless steel hose clamps Installation Notes Disconnect battery before installation Remove factory CCV hose and install billet plug Route vent hose downward to allow oil drainback Estimated install time: 30–45 minutes ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves System Cleanliness: Prevents oil vapor from coating turbo and intercooler Reduces EGTs: Enhances combustion efficiency and airflow Supports High-Performance Builds: Ideal for tuned or high-mileage engines Durable Construction: Leak-proof design with corrosion-resistant materials

Fuel Injector Set – Toyota 1.5L 1NZ-FE Platform (2000–2005) This flow-matched high impedance fuel injector set restores precise fuel delivery for Toyota 1.5L engines. Built to match OEM specs, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Numbers: 23250-21020 / 23209-21020 / 2325021020 / 2320921020 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: 12-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Toyota Echo: 2000–2005 | 1.5L I4 | 1NZ-FE Toyota Prius: 2001–2009 | 1.5L Hybrid | 1NZ-FXE Scion xA / xB: 2004–2006 | 1.5L I4 Note: Not compatible with turbocharged or GDI platforms Package Includes 4 × Fuel Injectors – OEM# 23250-21020 / 23209-21020 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

EGR & Throttle Valve Delete Kit – Dodge Ram 6.7L Cummins (2010–2014) This complete emissions delete kit removes the factory EGR valve, cooler, and throttle valve actuator from your 6.7L Cummins engine. It improves airflow, lowers EGTs, and enhances throttle response for off-road and performance builds. Key Features Material: TIG-welded T304 stainless steel + CNC-machined billet aluminum Includes: Intake block-off plates, throttle valve delete tube, coolant bypass hose, support bracket, gaskets, bolts Ports: Pre-drilled for optional EGT probe installation Function: Eliminates EGR valve, cooler, and throttle valve actuator Design: Bolt-on fitment – no turbo, manifold, or up-pipe removal required Fitment Compatibility Dodge Ram 2500 / 3500: 2010–2014 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 1 × Intake Block-Off Plate 2 × Exhaust Block-Off Plates 1 × Throttle Valve Delete Tube 1 × Throttle Valve Gasket 1 × Coolant Hose + Connector 1 × Support Bracket 2 × Hose Clamps Mounting Hardware (bolts, nuts, washers) 2 × Gaskets Installation Notes Disconnect battery and drain coolant before installation Remove EGR valve, cooler, throttle valve, and associated tubing Install block-off plates and bypass hose Race tuning required to disable EGR and throttle valve functions Estimated install time: 2–3 hours ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads is a violation of federal and state laws Restore Performance & Reliability Improves Airflow: Removes intake restrictions for smoother combustion Lowers EGTs: Reduces exhaust gas temperatures by up to 150°F Boosts Throttle Response: Eliminates actuator lag and airflow obstruction Supports Tuning: Ideal for performance builds and towing applications

Fuel Injector – Mitsubishi 2.0L / 2.4L MIVEC (2014–2019) This OEM-style high impedance fuel injector restores precise fuel delivery for Mitsubishi MIVEC engines. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Number: 1465A412 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Mitsubishi Lancer: 2015–2017 | 2.0L / 2.4L MIVEC Mitsubishi Outlander: 2014–2019 | 2.4L MIVEC Mitsubishi Outlander Sport: 2014–2019 | 2.0L MIVEC Mitsubishi Outlander PHEV: 2018–2019 | 2.4L Hybrid Note: Not compatible with turbocharged or diesel platforms Package Includes 1 × Fuel Injector – OEM# 1465A412 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

EGR Delete Kit + High Flow Intake Pipe – 6.6L LLY Duramax This EGR delete kit is engineered for 2004–2005 GMC Sierra, Kodiak, and  equipped with the 6.6L LLY Duramax diesel engine. It removes the EGR valve and cooler to improve airflow, reduce soot buildup, and enhance turbocharger response for off-road diesel performance. Key Benefits Eliminates EGR-related restrictions and soot accumulation Improves turbo spool-up and throttle response Recirculates coolant more efficiently than stock EGR system Includes high-flow intake elbow for enhanced airflow CNC-machined billet aluminum and stainless steel construction Pressure-tested for leak-free performance Fitment Compatibility 2004–2005 GMC Sierra 2500HD / 3500HD – 6.6L LLY Duramax 2004–2005 GMC Topkick 4500 / 5500 – 6.6L LLY Duramax What's Included 1x Nickel-plated steel exhaust block-off plate 1x High-flow intake elbow 1x Rubber O-ring seal 1x Coolant hose (430mm) 2x Hose clamps 1x M10 × 20mm hex head bolt 2x M8 × 30mm allen bolts 2x M10 × 30mm hex bolts 2x M8 × 20mm hex bolts Notes Does not require removal of turbo, intake manifold, or up-pipe Installation instructions not included Requires DPF-delete capable tuner to prevent CEL/DTC codes For off-road or race use only – not legal for highway use in emissions-regulated areas Estimated install time: approx. 2 hours with basic hand tools Boost Reliability & Performance Removing the EGR system helps prevent intake clogging, improves combustion efficiency, and enhances turbocharger performance. Ideal for off-road builds, towing applications, and diesel enthusiasts seeking long-term engine health.

DPF/CAT + EGR + Throttle Valve Delete Kit – Dodge Ram 6.7L Cummins (2013–2017) This complete emissions delete kit removes the restrictive diesel particulate filter (DPF), catalytic converter (CAT), EGR valve/cooler, and throttle valve actuator from your 6.7L Cummins engine. Designed for off-road and race use, it improves airflow, lowers EGTs, and enhances throttle response. Key Features Material: TIG-welded SUS409 stainless steel – 2mm wall thickness Pipe Diameter: 4" inlet – mandrel bent for smooth flow Function: Eliminates soot buildup, reduces regens, improves turbo spool Design: Includes coolant bypass hose – no blocked coolant lines Finish: Raw stainless – corrosion and heat resistant Fitment Compatibility Dodge Ram 2500 / 3500: 2013–2017 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 2 × Muffler Delete Pipes 2 × Pipe Clamps 1 × Hanger Bracket 3 × Bolts 1 × EGR Block-Off Plate with O-Rings 1 × Front Block-Off Plate 1 × Rear Block-Off Plate 1 × Coolant Standpipe Adapter with O-Ring 1 × Locking Collar with Set Screws 1 × Support Bracket 1 × Threaded Stud + Flange Nut + Spacer 1 × Coolant Hose 3 × Hex Head Bolts (5/16") 1 × Hex Head Bolt (1/4") 4 × Locking Nuts (1 Small + 3 Large) 1 × Throttle Valve Delete Tube + Gasket 4 × Flange Bolts Installation Notes Disconnect battery and drain coolant before installation Remove DPF, CAT, EGR valve/cooler, and throttle valve actuator Install block-off plates, coolant bypass, and delete pipe Race tuning required to disable emissions functions and avoid fault codes Estimated install time: 3–5 hours ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves Airflow: Removes intake and exhaust restrictions Lowers EGTs: Reduces exhaust gas temperatures by up to 200°F Boosts Throttle Response: Eliminates actuator lag and backpressure Supports Tuning: Ideal for performance builds and towing applications

EGR Delete Kit – Ford 6.7L Powerstroke (2011–2019) This complete EGR delete kit removes the factory exhaust gas recirculation system from your Ford 6.7L Powerstroke engine, improving performance, reliability, and airflow. Ideal for off-road and race-use applications. Key Features Material: TIG-welded aluminum alloy + stainless steel + high-temp silicone Includes: Intake damper, exhaust manifold barrier plate (EGT sensor ready), coolant closing panel, radiating pipe, hose clamp, vacuum cover, pressure sensor bracket + hardware Function: Eliminates EGR flow, reduces soot buildup, lowers exhaust gas temperatures Improves: Turbo spool-up, throttle response, fuel economy, coolant temperature (drops ~5–8°C) Fitment Compatibility Ford Super Duty: F250 / F350 / F450 / F550 Years: 2011–2019 Engine: 6.7L OHV V8 Powerstroke Turbo Diesel – VIN Code “T” Note: Not compatible with California CARB-certified vehicles or Cab & Chassis commercial platforms Package Includes 1 x Exhaust Manifold Barrier Plate (EGT sensor ready) 1 x Intake Damper 1 x Coolant Closing Panel 1 x Radiating Pipe 1 x Stainless Steel Hose Clamp 1 x Vacuum Cover 1 x Pressure Sensor Bracket 1 x Pressure Sensor Bracket Hardware 3 x M8 Bolts 3 x M8 Flat Washers 3 x Zip Ties Installation Notes Professional installation recommended Requires removal of EGR valve and cooler ECU tuning required to prevent check engine light Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

Manual Locking Hubs – 28 Spline | Nissan 4WD Platforms This OEM-style manual locking hub kit is designed for Nissan 4WD vehicles with 28-spline front axle shafts. It allows manual engagement/disengagement of the front wheels for improved fuel efficiency and drivetrain longevity. Key Features OEM reference: 40250-2S610 / AVM461HP Material: Forged steel gear + aluminum alloy housing Includes high-seal rubber O-rings and mounting hardware 28-spline interface – fits standard Nissan front axles Direct bolt-on replacement – no modifications required Fitment Compatibility Nissan Xterra: 2000–2004 – SE / XE – 2.4L / 3.3L Nissan Frontier: 1998–2004 – Base / SC / SE / SVE / XE – 2.4L / 3.3L Nissan Pathfinder: 1990–2004 – Base / LE / SE / XE – 3.0L / 3.3L / 3.5L Nissan D21 Hardbody: 1990–1994 – Base / SE / XE – 2.4L / 3.0L Nissan Pickup: 1995–1997 – SE / XE – 2.4L / 3.0L Nissan Titan: 2004 – LE / SE / XE – 5.6L Note: Only compatible with 28-spline front axles. Not suitable for automatic locking hubs or AWD systems. Package Includes 2 x Manual Locking Hubs – Left & Right Mounting bolts and O-rings Installation Notes Clean hub surface and apply high-temp grease before installation Torque bolts to factory spec Engage/disengage manually when switching between 2WD and 4WD Shipping & Warranty Free shipping within USA & Australia Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

OBD2 8-Pin to OBD1 Distributor Adapter Harness – Honda Civic SOHC VTEC This adapter harness converts a factory OBD2 8-pin distributor plug to an OBD1 7-pin distributor, commonly used in 1992–1995 Honda engine swaps. Ideal for 1999–2000 Civic DX/LX/EX models with D16Y7 or D16Y8 engines upgrading to OBD1 ignition components. Key Benefits Allows use of OBD1 distributor on OBD2 chassis harness Plug-and-play design with OEM-style locking connectors Copper core wiring with nylon shielding for durability Supports D-series SOHC VTEC ignition systems Fitment Compatibility Honda Civic (1999–2000) – DX / LX / EX – D16Y7 / D16Y8 Acura EL (1999–2000) – Canada market Other Honda/Acura chassis with OBD2 SOHC distributor conversion What's Included 1 x OBD2 8-Pin to OBD1 Distributor Adapter Harness Notes Adapter direction: 8-pin chassis → 7-pin OBD1 distributor Not compatible with DOHC / Si / B-series platforms Non-waterproof; recommended for clean engine bays Estimated install time: 5–10 minutes Ignition System Compatibility Perfect for engine swaps or distributor upgrades. This harness ensures proper signal routing between chassis and distributor, supporting reliable ignition timing and spark delivery.

Throttle Position Sensor – Williams Controls 133284 This aftermarket replacement throttle position sensor is designed for heavy-duty vehicles equipped with Williams Controls pedal assemblies. It provides accurate throttle input for ECM control and engine response. Key Features 6-pin connector with digital output Linear voltage range: 0.5V to 4.5V Compatible with Cummins ISM / N14, Volvo D13, Navistar DT466 platforms Durable ABS housing with sealed electronics 3-year warranty and 30-day return policy Fitment Compatibility Navistar International: 4000 Series, 7000 Series, ProStar, WorkStar – 1998–2012 Volvo Trucks: VNL / VNM / VHD – 2000–2015 Ford Heavy Duty: F-650 / F-750 – 2000–2010 Peterbilt / Freightliner: Select models with Williams pedal assemblies Replaces OEM Part Numbers Williams Controls: 133284, 131973 Navistar: 2603893C91, 2603895C91, 2586248C91, 2587164C92, 1697269C91 Volvo: 85101350 Ford: 8C40-9F832-BA What's Included 1 x Throttle Position Sensor Installation Notes Mounts to Williams Controls pedal assembly Ensure connector is fully seated and sealed Some ECMs may require throttle calibration after installation Performance Restoration Ideal for resolving throttle lag, erratic acceleration, or ECM fault codes. This sensor restores OEM throttle response and ensures smooth engine control under all load conditions.