Search results for "Oil Coolers":

Fuel Filter Canister Cap – Dodge Ram 6.7L Cummins (2010–2018) This engine-side fuel filter cap replaces the OEM plastic cover on Dodge Ram 6.7L Cummins diesel trucks. Built from CNC-machined billet aluminum, it offers superior durability, corrosion resistance, and ease of service. Key Features Material: CNC-machined 6061-T6 billet aluminum Finish: Black anodized coating – corrosion and fade resistant Fitment: Replaces OEM part #68065612AA – engine-mounted fuel filter cap Tool Compatibility: 28mm hex head – compatible with standard metric socket Design: Reinforced structure – resists cracking and over-torque damage Fitment Compatibility Vehicle: Dodge Ram 2500 / 3500 / 4500 / 5500 Engine: 6.7L Cummins Turbo Diesel Years: 2010–2018 Note: Fits engine-side fuel filter housing only – not compatible with chassis-mounted filter caps Package Includes 1 × Fuel Filter Canister Cap – anodized black O-ring not included – use the one provided with your new filter Installation Notes Use 28mm socket for removal and installation Torque to factory spec – avoid over-tightening Estimated install time: under 10 minutes Restore Performance & Reliability Improves Serviceability: Hex head design simplifies removal Enhances Durability: Resists cracking and deformation under heat and pressure Preserves Seal Integrity: Maintains proper compression on filter O-ring OEM Replacement: Direct fit for 68065612AA – no modifications required

Engine Variable Valve Timing (VVT) Solenoid – OEM-Compatible 15810-R70-A04 This VVT solenoid controls camshaft timing to optimize engine performance and fuel efficiency. Designed for Honda and Acura 3.5L V6 engines, it restores proper valve timing and eliminates check engine light issues caused by solenoid failure. Key Benefits Restores dynamic valve timing control Improves fuel economy and throttle response OEM-style plug and mounting flange High-temperature resistant housing and stainless steel internals Fitment Compatibility Honda Accord V6 (2008–2012) Honda Crosstour V6 (2010–2012) Honda Odyssey V6 (2008–2017) Honda Pilot V6 (2009–2015) Acura RDX V6 (2013–2015) Replaces OEM Part Numbers 15810-R70-A04 15810-R70-A03 918-056 What's Included 1 x Engine Variable Timing Solenoid – OEM-Compatible Notes Mounts to cylinder head near camshaft Does not include gasket or mounting bolts Professional installation recommended Estimated install time: 30–45 minutes Engine Performance Restoration Ideal for resolving rough idle, poor acceleration, or diagnostic codes related to camshaft timing. This solenoid restores factory valve timing function and ensures smooth engine operation under all driving conditions.

Distributor O-Ring & Shaft Seal Kit – OEM-Compatible This seal kit includes two critical components for Honda/Acura distributors: the outer O-ring and the internal shaft seal. Designed to prevent oil leaks and maintain ignition system integrity, it fits most D/B/F/H-series engines with non-Hitachi distributors. Key Benefits Stops oil seepage from distributor housing and shaft Restores proper sealing and ignition performance Made from high-temp, oil-resistant NBR rubber Direct-fit replacement for OEM seals Included Components 1 x Distributor Shaft Seal – OEM 91209-612-003 (12.5mm × 22.5mm × 5mm) 1 x Distributor Housing O-Ring – OEM 30110-PA1-732 (26.4mm × 3.1mm) Fitment Compatibility Honda Civic (1984–2000) – All trims incl. DX, LX, EX, Wagovan, RT 4WD Honda Accord (1984–2002) – Except V6 & Hitachi distributor models Honda CR-V (1997–2001) Honda CRX (1988–1991) Honda del Sol (1993–1997) Honda Prelude (1983–2001) Honda Wagovan (1984–1987) Acura Integra (1986–2001) – All trims incl. GS-R, Type R Acura EL (1997–2000) Acura Legend (1986–1990) Acura Vigor (1992–1994) Exclusions Not compatible with Hitachi distributors (e.g., D4T94-04, D4T97-03) Not compatible with F22B1, F23A1, F23A4, F23A7 engines Notes Instruction manual not included Professional installation recommended Estimated install time: 20–30 minutes Ignition System Leak Prevention Ideal for resolving oil leaks around the distributor base or shaft. This kit restores proper sealing and protects internal ignition components from contamination.

EGR Delete Kit – Dodge Ram 6.7L Cummins Cab & Chassis (2013–2018) This complete EGR delete kit removes the factory exhaust gas recirculation system from your Ram Cab & Chassis 6.7L Cummins engine, improving performance, reliability, and airflow. Designed for off-road and race-use applications only. Key Features Material: TIG-welded aluminum alloy + high-temp silicone seals Includes: Intake block-off plate, exhaust manifold plate (EGT probe ready), billet standpipe cap, billet block plug, coolant bypass hose, gaskets, bolts Function: Eliminates EGR flow, reduces soot buildup, lowers exhaust gas temperatures Improves: Turbo spool-up, throttle response, fuel economy, coolant temperature (drops ~5–8°C) Fitment Compatibility Dodge Ram Cab & Chassis: 3500 / 4500 / 5500 Years: 2013–2018 Engine: 6.7L L6 OHV Cummins Turbo Diesel – VIN Code “L” Note: Not compatible with pickup trucks or California CARB-certified vehicles Package Includes 1 x Intake Block-Off Plate 1 x Exhaust Manifold Plate (EGT probe ready) 1 x Billet Standpipe Cap 1 x Billet Block Plug 1 x Coolant Bypass Hose 4 x Gaskets 6 x Mounting Bolts Installation Notes Professional installation recommended Requires removal of EGR valve and cooler ECU tuning required to prevent check engine light Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

EGR Delete + High Flow Intake Elbow Kit – 6.6L LLY Duramax This EGR delete and intake elbow kit is designed for 2004–2005 GM trucks equipped with the 6.6L LLY Duramax diesel engine. It replaces restrictive factory EGR components and improves airflow, throttle response, and turbo spool-up. Key Benefits Eliminates EGR flow for cleaner combustion Improves throttle response and turbo efficiency High-flow intake elbow with rubber seal (O-ring) Includes exhaust block-off and coolant reroute hose Nickel-plated steel components for corrosion resistance Fitment Compatibility Chevy Silverado 2500HD / 3500HD – 6.6L LLY Duramax (May 2004–2005) Chevrolet Kodiak 6.6L LLY Duramax (2004–2005) What's Included 1 x High Flow Intake Elbow Tube 1 x Rubber Seal (O-ring) 1 x Nickel-Plated Steel Exhaust Block-Off Plate 1 x Coolant Hose (430mm / 17") 2 x Hose Clamps 1 x M10 x M20 Hex Head Bolt 2 x M8 x 30mm Allen Bolts 2 x M10 x 30mm Hex Bolts 2 x M8 x 20mm Hex Bolts Notes Only compatible with LLY Duramax engines (VIN “2” or “D”) Not for LB7 or LBZ engines – confirm VIN before ordering For off-road or race use only – not legal for highway use in emissions-regulated areas No instructions included – professional installation recommended Restore Performance & Reliability This kit helps eliminate common EGR-related issues such as clogged intake manifolds, excessive soot buildup, and poor throttle response. Ideal for towing, off-road, or performance builds.

EGR Delete / Block Off Kit for Chevy Silverado & Suburban This 3-piece EGR delete block off kit is designed to eliminate the exhaust gas recirculation system on select GMC Yukon models with 4.3L or 5.7L CPI Vortec engines. By removing the EGR pathway, this kit improves intake airflow, reduces carbon buildup, and enhances throttle response. Key Benefits Eliminates EGR flow for cleaner combustion Improves engine performance and airflow Reduces carbon deposits and intake contamination Simple bolt-on installation Fitment Compatibility GMC Yukon (1996–2009) What's Included 1 x EGR block off plate 1 x intake plug 1 x exhaust block off plate Notes For off-road or racing use only May trigger check engine light if not tuned Professional installation recommended Restore Engine Efficiency By removing the EGR system, this kit helps restore lost horsepower and ensures cleaner combustion, especially on older CPI Vortec engines.

Description: 100% brand new, Never been tried or installed Made of High Quality T304 Stainless Steel Material 2 x 4-1 manifolds connecting into a 3" Y-pipe TIG welded CNC machined flange Increase high flow air, instantly gain 10 to 15 Hp. / Tq. Bolt-on installation Improve Sound, Horsepower & Torque Mandrel-Bent For Maximum Performance TIG Weld & Polished Stainless Steel Thick Steel Flanges Head Gaskets Included. Reuse OEM Bolts & Donut Gaskets No instructions included Professional installation is highly recommended   Package including: 1X Set of Header Exhaust with Y-pipe Gasket(s) and Bolt(s) as shown in the Picture Show   Fitment: 1999-2006 CHEVY/GMC GMT800 SILVERADO/SIERRA 1500 For More Years and Models, Please Check Compatibility Will not fits Z71 or 4X4 models        

Product Description： 100% Brand New, Never been used. Fits Ford 6.0L diesel engines This kit is a high flow type intended for off road use Professional Installation is Highly Recommended (No Instruction Included) Package includes：  1X EGR Delete Kit 180 Degree Stainless Steel Coolant Tube Stainless Steel Up-pipe assembly Billet EGR block-off with O-Ring 0.75" Silicone Hose 2X Worm drive hose Clamps 4X Serrated Flange Nuts - 5/16 NC 2X Six Point Bolts - 5/16 NC x 2" 2X Six Point Bolts - 5/16 NC x 1.25" 1X Spring Upgrade Kit 1X Silicone Sealant     Fitment： 2003 2004 2005 2006 2007 Ford F250 F350 F450 F550 Excursion and 2005 2006 2007 2008 2009 2010 E-Series Vans ​     NOTE： Not for sale or use on any pollution controlled vehicle in the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Please check your local, state, and federal laws before purchasing! This Product is designed and intended solely for legally-organized and sanctioned, closed- course, off-road competition use and is not for use on public streets, roads or highways. This Product is capable of disabling the emissions system on some vehicles. Emission delete products are for the above-mentioned uses only—or where emissions equipment is not required by law. Use on public streets, roads or highways is a violation of federal and certain state(including California) and local environmental laws. Your vehicle will not pass emissions testing if the emissions system has been disabled By purchasing our delete kit, you are also (a) certifying that your use of this Product will at all times be limited to lawful off-road competition uses consistent with the terms of this Disclaimer and (b) consenting to the disclosure of your identity to any governmental entity responsible for regulating emissions and/or enforcing emissions laws In the event that the buyer accepts but subsequently determines that he/she will not be able to comply with the terms of this disclaimer, the buyer may promptly return this product, in a new and unused condition, with a dated proof of purchase, to the place of purchase within ten (10) days from date of purchase for a full refund

Fuel Injector – Ford / Lincoln / Mercury V8 (1990–2005) This OEM-style Bosch fuel injector delivers precise fuel atomization for Ford, Lincoln, and Mercury V8 engines. Featuring a 4-hole spray pattern and high-impedance coil, it ensures smooth combustion and throttle response. Key Features OEM reference: 0280150943 / 0280150939 / F1ZE-A2B Connector type: EV1 Jetronic Spray pattern: 4-hole disc – 15° cone Coil type: High impedance – compatible with stock ECU Seal: Viton O-rings – fuel and heat resistant Filter: Basket filter at inlet Fitment Compatibility Ford: F-150 / F-250 / F-350 – 5.0L / 5.4L / 5.8L V8 (1990–2003) Mustang – 4.6L V8 (1996–2004) Expedition / Excursion – 4.6L / 5.4L V8 (1997–2005) E-Series Vans – E-150 / E-250 / E-350 – 4.6L / 5.4L / 5.8L / 7.5L V8 (1990–2003) Bronco – 5.0L / 5.8L V8 (1991–1996) Lincoln: Navigator – 5.4L V8 (1998–1999) Town Car – 4.6L V8 (1991–1994) Mercury: Grand Marquis – 4.6L V8 (1992–1997) Note: Only compatible with EV1-style injector connectors. Not suitable for EV6 or newer platforms. Package Includes 1 / 4 / 8 x Fuel Injectors (based on selection) Installation Notes Lubricate O-rings before installation Recommended to replace injectors as a matched set Idle calibration may be required for optimal performance Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

【Fits】2003 2004 2005 2006 2007 Ford 6.0L Powerstroke 【Carefully build】chrome plated, high-quality part, made the transition from electric to manual clutch seamless 【Function】It can be converted from 6.0L cooling fan assembly controlled by electric and computer to rugged mechanical fan clutch on the 1997 Ford 7.3L diesel 【Install】Easy to install and save the trouble, the 6.0L fan will bolt to the 1997 7.3L fan clutch Necessary conditions for replacing non-electric clutch fans, this combination works very well for those that require heavy-duty cooling needs Note:Only compatible with the 1997 7.3L Ford fan clutchIt will result in stored trouble codes (soft codes that should not turn on the "Service Engine Soon" light)This is a normal phenomenon

EGR Delete Kit – BEW/BHW TDI Diesel (2004–2005) This EGR block-off kit is designed for 2004–2005 VW TDI platforms equipped with the 1.9L BEW or 2.0L BHW diesel engine. It removes the EGR valve and cooler to improve airflow, reduce soot buildup, and enhance turbo response for off-road diesel performance. Key Benefits Eliminates EGR-related restrictions and carbon deposits Improves throttle response and intake efficiency Prevents intake clogging and reduces exhaust backpressure CNC-machined from 6061-T6 billet aluminum for strength and precision Anodized finish resists corrosion and heat distortion Fitment Compatibility 2004–2005 VW Golf MK4 – 1.9L BEW TDI FWD 2004–2005 VW Jetta MK4 – 1.9L BEW TDI FWD 2004–2005 VW Beetle – 1.9L BEW TDI FWD 2004–2005 VW Passat B5 – 2.0L BHW TDI FWD ⚠️ For front-wheel drive (FWD) models only What's Included 3× CNC anodized block-off plates 3× High-temp graphite gaskets 2× Stainless steel nuts 1× 90° pagoda-style hose joiner 1× Straight hose joiner Notes 100% brand new components Designed for off-road or race use only – not legal for highway use in emissions-regulated areas Installation requires basic hand tools Ships from US warehouse with free shipping Boost Reliability & Performance Removing the EGR system helps prevent intake clogging, improves combustion efficiency, and enhances turbocharger performance. Ideal for off-road builds, TDI tuning, and long-term engine health.

Product Description100% Brand new,never been usedProfessional installation is highly recommend.(No Instruction Included)EGR BYPASS DELETE KITMade of Highest Quality Stainless SteelDoes not Require Removal of Turbo, Intake Manifold or Up PipeCNC Machined Billet Aluminum and Stainless SteelCompletely Replaces EGR System, No other Parts RequiredPressure Tested and Guaranteed not to LeakAll DPF/EGR-OFF tuning products are STRICTLY FOR RACE USE ONLY.INTAKE ELBOW KITColor: BlackMandrel bent tubing(2) 1/8" NPT bungs installedFully TIG welded and pressure testedO-Ring seal designed to handle any boost pressureFitmentFits Ford 6.0L V8 Diesel Turbo Engines2003-2007 F250 F350 F450 F5502003-2007 Excursion2005-2010 E-Series Vans​Package Includes1X EGR Bypass Delete Kit1X Intake Elbow Kit In addition, we are looking for long-term cooperative auto parts agents. We are mainly engaged in auto parts of American models, lawn mower parts, ATV, UTV parts, RV parts, ship parts and tool goods. If you need other products, please contact us and we will give you unexpected prices.  

Universal Fuel Primer Bulb – 6mm to 12mm Hose This hand-operated fuel primer bulb is designed for quick and efficient fuel system priming in marine, automotive, and small engine applications. Ideal for outboard motors, generators, ATVs, and agricultural equipment. Key Features Compatible with 6mm, 8mm, 10mm, and 12mm fuel lines Durable rubber bulb with corrosion-resistant aluminum connectors Built-in one-way valve for directional fuel flow Supports gasoline, diesel, biodiesel, and E85 Compact size: 15cm overall length Fitment Compatibility Marine: Outboard engines (Yamaha, Mercury, Suzuki, Honda), Jet Skis, small boats Automotive: Carbureted engines, fuel transfer systems, off-road vehicles Power Equipment: Generators, lawn mowers, pressure washers Agricultural: Tractors, sprayers, diesel pumps Package Includes 1 x Fuel Primer Bulb Installation Notes Connect inline between fuel tank and engine Ensure arrow direction matches fuel flow Prime until fuel reaches carburetor or injector Shipping & Warranty Ships from US warehouse Free shipping within USA & Australia 30-day return policy 2-year product guarantee

Green Diesel Fuel Cap & Blue DEF Cap – Dodge Ram Diesel (2013–2019) This billet aluminum fuel cap set is designed to protect your Dodge Ram’s fuel and DEF systems from contamination. Compatible with capless fuel systems, it offers a secure seal and magnetic retention for easy handling. Key Features Material: CNC-machined 6061-T6 billet aluminum Finish: Anodized green (diesel) and blue (DEF) – corrosion and fade resistant Seal: Buna-N nitrile O-ring – fuel and DEF compatible Magnet: Neodymium magnet in diesel cap base – attaches to fuel door during refueling Fitment: DEF cap attaches to factory tether loop Fitment Compatibility Vehicle: Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500 Engine: Cummins 6.7L Turbo Diesel & EcoDiesel 3.0L V6 Years: 2013–2019 System: Compatible with capless fuel systems only Note: Not compatible with gasoline engines or vehicles with threaded fuel caps Package Includes 1 × Green Diesel Fuel Cap – Magnetic Base 1 × Blue DEF Cap – Tether Compatible Installation Notes Remove factory plastic caps Insert DEF cap into tether loop Use magnetic diesel cap during refueling – attaches to fuel door No tools required – install time: under 1 minute Restore Performance & Reliability Protects Fuel System: Blocks dust, water, snow, and debris Prevents Engine Damage: Reduces risk of fuel contamination and injector failure Improves Convenience: Magnetic retention prevents cap loss Durable Construction: Billet aluminum resists corrosion and heat

EGR / FITV / Air Boost Delete Block Off Plate – CNC Billet Aluminum This block off plate is designed to eliminate unused or faulty emissions and idle control components on Honda/Acura F- and H-series engines. Precision CNC-machined from aircraft-grade 6061-T6 aluminum with anodized finish for durability and corrosion resistance. Key Benefits Removes EGR valve, Fast Idle Thermo Valve (FITV), and Air Boost Valve Improves engine bay cleanliness and simplifies vacuum routing Prevents idle surge and emissions-related CEL codes (with ECU tuning) Will not warp or deform under heat and pressure Fitment Compatibility Honda Accord 2.2L (1990–1997) – F22A/F22B/F20A4 Honda Civic (1992–1997) – VTEC models only Honda Prelude 2.2L/2.3L (1992–1996) – H22A/H23A Acura Integra (1992–1997) – GSR/LS/Type R with H-series swap What's Included 1 x CNC Billet Aluminum Block Off Plate Notes Not compatible with D-series engines or non-VTEC platforms Does not include gasket or mounting hardware ECU tuning recommended to disable EGR-related codes Estimated install time: 15–30 minutes Emissions & Idle Control Simplification Ideal for engine swaps, track builds, or emissions system removal. This block off plate helps eliminate unnecessary vacuum lines and idle control components, improving reliability and engine bay aesthetics.