Range Technology AFM Disabler RA003 – Plug & Play for GM V6/V8 This AFM disabler module by Range Technology instantly disables Active Fuel Management (AFM) on GM vehicles equipped with V6 or V8 engines. Simply plug it into your OBD-II port and enjoy full-time power without cylinder deactivation. Key Benefits Eliminates AFM shuddering and cylinder dropouts Improves throttle response and exhaust tone Plug & play – no tools or programming required Safe and reversible – unplug to restore factory settings Ideal for towing, off-road, and heavy load conditions Fitment Compatibility Compatible with GM vehicles equipped with AFM (Active Fuel Management) systems: Chevrolet Silverado / Suburban / Tahoe / Avalanche (2007–2020) GMC Sierra / Yukon / Yukon XL / Denali (2007–2020) Cadillac Escalade / CTS / XT5 / XTS / SRX (2004–2019) Buick Enclave / LaCrosse / Rainier / Regal GS (2005–2018) Pontiac G8 / Grand Prix (2005–2010) Pontiac Torrent / Montana – select V6/V8 models with AFM Saturn Outlook / Aura XR – equipped with 3.6L AFM V6 Hummer H2 – 6.0L/6.2L V8 with AFM; H3 – only 5.3L V8 supports AFM Isuzu Ascender – 5.3L V8 models with AFM What's Included 1 x Range Technology AFM Disabler RA003 Quick-start guide Notes Only use if valvetrain is in good condition Unplug to revert to factory AFM settings Not a tuning device – does not alter ECU programming Why Disable AFM? AFM systems deactivate cylinders to improve fuel economy, but often cause vibration, oil consumption, and reduced performance. This disabler keeps all cylinders active for smoother driving and better power delivery.

Universal Fuel Primer Bulb – 6mm to 12mm Hose This hand-operated fuel primer bulb is designed for quick and efficient fuel system priming in marine, automotive, and small engine applications. Ideal for outboard motors, generators, ATVs, and agricultural equipment. Key Features Compatible with 6mm, 8mm, 10mm, and 12mm fuel lines Durable rubber bulb with corrosion-resistant aluminum connectors Built-in one-way valve for directional fuel flow Supports gasoline, diesel, biodiesel, and E85 Compact size: 15cm overall length Fitment Compatibility Marine: Outboard engines (Yamaha, Mercury, Suzuki, Honda), Jet Skis, small boats Automotive: Carbureted engines, fuel transfer systems, off-road vehicles Power Equipment: Generators, lawn mowers, pressure washers Agricultural: Tractors, sprayers, diesel pumps Package Includes 1 x Fuel Primer Bulb Installation Notes Connect inline between fuel tank and engine Ensure arrow direction matches fuel flow Prime until fuel reaches carburetor or injector Shipping & Warranty Ships from US warehouse Free shipping within USA & Australia 30-day return policy 2-year product guarantee

AN10 Flare Bulkhead Fitting – CNC Aluminum | Black Anodized This universal AN10 bulkhead fitting is CNC-machined from aircraft-grade 6061-T6 aluminum and anodized in black for corrosion resistance. Designed for high-performance fuel systems, it provides secure sealing and unrestricted flow for fuel, oil, or coolant applications. Key Features Size: AN10 | Thread: Flare | Type: Straight Bulkhead Material: 6061-T6 aluminum – CNC-machined for precision Finish: Black anodized – corrosion-resistant and durable Washer: Included – oil-resistant sealing washer Compatibility: Gasoline, diesel, alcohol, E85, coolant Fitment Applications Fuel cells, surge tanks, oil coolers, radiators Universal fit for race cars, street builds, off-road setups Recommended mounting hole: 11/16" (approx. 17.5mm) Package Includes 1 × AN10 Bulkhead Fitting 1 × Sealing Washer Installation Notes Drill mounting hole to recommended diameter Insert fitting through bulkhead and secure with nut Use PTFE tape or O-ring for enhanced sealing if needed Restore Performance & Reliability Leak-Free Seal: Prevents fluid seepage under pressure High Flow Efficiency: Radiused entry reduces turbulence and restriction Corrosion Protection: Anodized finish resists fuel and environmental damage Universal Fitment: Compatible with most AN10 hose ends and adapters Motorsport-Grade Build: Ideal for demanding fuel and oil systems

292PCS Body Retainer Clip Assortment – Multi-Vehicle Applications This OE-style fastener kit includes 292 pieces of commonly used body clips for Toyota, GM, Mazda, Isuzu, and more. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, insulation, hood seal, headlight/grille nuts Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, GM, Mazda, Isuzu, Honda, Mitsubishi, Nissan Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Hilux, Celica, MR2, Tercel, Land Cruiser, Tacoma, T100 GM: Chevrolet Nova, Prizm, Pontiac Vibe, Cadillac, GMC Mazda / Isuzu / Honda / Nissan / Mitsubishi: Compatible with select models Years: 1985–2022 Note: Not compatible with active grille shutters or electronic trim systems Package Includes 292 × Assorted Retainer Clips (20+ types) 1 × Screwdriver 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size (5mm–10mm) Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

150PCS Universal Retainer Clip Kit – Multi-Vehicle Applications This complete fastener assortment includes 150 push-type rivet clips in 6 common sizes, ideal for repairing or replacing broken retainers on bumpers, fenders, doors, hoods, and interior panels. Designed for universal fitment across major vehicle brands. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: 6 sizes of push-type clips for 8mm / 10mm holes Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Honda, Mazda, Chevrolet, Ford, VW, Hyundai, and more Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Highlander, Prius, Sienna, Yaris Honda: Civic, Accord, CR-V, Odyssey, Fit Mazda: 3, 6, CX-5, CX-7 Chevrolet: Cruze, Malibu, Tahoe, Suburban Ford: Focus, Fusion, Mustang, Edge Hyundai / Kia / VW / BMW / Audi / Mercedes-Benz: Compatible with select models Note: Universal fitment for vehicles from 1985–2022. Not compatible with active grille shutters or electronic trim systems. Package Includes 150 × Push-Type Retainer Clips (6 sizes) 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

1.5" Rear Leveling Lift Kit – GM 1500 SUV Platform (2001–2019) This precision-machined rear lift kit raises the rear of your GM SUV by a true 1.5 inches. Ideal for eliminating factory rake, improving towing geometry, and enhancing off-road clearance. Key Features Material: CNC-machined 6061-T6 billet aluminum Finish: Black anodized – corrosion & heat resistant Lift Height: True 1.5" rear lift (not 1:1 spacer thickness) Design: Bolt-on installation – no cutting or welding required Function: Levels stance, improves rear clearance and towing posture Fitment Compatibility Chevrolet Tahoe / Suburban 1500: 2001–2019 | 2WD & 4WD Chevrolet Avalanche 1500: 2001–2013 | 2WD & 4WD GMC Yukon / Yukon XL 1500: 2002–2019 | 2WD & 4WD Also fits: Trailblazer, Envoy, Hummer H2, Isuzu Ascender, Oldsmobile Bravada Note: Not compatible with 2500HD / 3500HD or auto-leveling suspension systems Package Includes 2 × Rear Lift Spacers – CNC Billet Aluminum Installation hardware (if applicable) Installation Notes Estimated install time: 1.5–2 hours No shock or spring disassembly required Professional alignment recommended after installation Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 2-year product guarantee

LS Swap Steam Port Adapter – 1-1/4" Hose Barb w/ 1/8" NPT This billet aluminum adapter allows you to conveniently add a steam port or sensor connection to your top radiator hose during an LS engine swap. Ideal for coolant venting or gauge installation. Key Features Material: CNC-machined T6061 billet aluminum Finish: Anodized silver – corrosion & heat resistant Port: Integrated 1/8" NPT female thread Function: Supports steam venting, coolant recirculation, or sensor installation Fitment: 1-1/4" outer diameter radiator hose Fitment Compatibility Engine Platforms: GM LS Gen III / Gen IV Examples: LS1, LS2, LS3, LS6, LQ4, LQ9, LM7, LY6 Note: Not compatible with LT series engines Package Includes 1 × Hose Barb Coupler with 1/8" NPT Port Installation Notes Cut radiator hose and insert adapter inline Use hose clamps to secure both ends Apply thread sealant or PTFE tape to NPT port before installing sensor or fitting Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 180-day product warranty

Standalone Wiring Harness – LS Vortec DBW (2003–2007) This plug-and-play standalone wiring harness is designed for LS-based Vortec engines with drive-by-wire throttle bodies and 4L60E automatic transmissions. Ideal for LS swap projects in muscle cars, trucks, and off-road builds. Key Features Supports LS 4.8L / 5.3L / 6.0L DBW engines (2003–2007) Compatible with 4L60E transmission only Includes OBD-II DLC port, MIL light, tach, speedo, TCC, and park/neutral wiring Delphi OEM connectors + TXL high-temp wire Sliding grommet seal for firewall pass-through Supports Multec injectors; EV6 adapters available upon request Fitment Compatibility Engine Platforms: LM7 – 5.3L LQ4 / LQ9 – 6.0L LR4 – 4.8L Transmission: 4L60E only Throttle: Drive-by-wire (DBW) only – not compatible with cable throttle Package Includes 1 x Standalone Wiring Harness – pre-terminated 1 x OBD-II DLC port 1 x Instruction Manual Installation Notes Requires 4-wire hookup: switched power, constant power, ground, fuel pump PCM mounting length: 4–5 ft from rear cylinder head Professional installation recommended Shipping & Warranty Free FedEx Express shipping (USA & Australia) Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

Brass Thread Adapter – 1/8 NPT Female to 1/8 BSPT Male This universal brass adapter fitting allows seamless connection between US-standard NPT female ports and UK/Euro BSPT male threads. Ideal for oil pressure sensors, fuel gauges, turbo boost lines, and coolant steam ports. Key Features Thread Type: 1/8" NPT (female) to 1/8" BSPT (male) Material: Industrial-grade brass – corrosion resistant Finish: Machined brass with anti-oxidation coating Pressure Rating: Up to 300 PSI Temperature Range: -40°C to 120°C Applications Oil pressure sensor adapters Fuel pressure gauge fittings Turbo boost sensor lines Coolant steam port adapters Universal fit for automotive, marine, and industrial use Package Includes 1 x Brass Adapter – 1/8 NPT Female to 1/8 BSPT Male Installation Notes Use thread sealant or PTFE tape for leak-free installation Do not overtighten – brass threads may deform Verify thread compatibility before installation Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

EGR Delete Block-Off TBI Plate Kit for Chevy/GMC V6/V8 TBI Engines This EGR delete plate is designed for Chevy and GMC vehicles equipped with throttle body injection (TBI) systems. It eliminates the EGR and idle air control valves for off-road or racing use, improving airflow and engine bay simplicity. Key Benefits Improves throttle response and reduces carbon buildup Precision CNC-machined from aircraft-grade 6061 T6 aluminum Black anodized finish for durability and corrosion resistance Compatible with a wide range of GM V6/V8 platforms from 1980–1995 Fitment Compatibility Chevy Camaro, Impala, C1500, C2500, C3500 (1980–1995) GMC C1500, C2500, C3500, Caballero, Vandura, Suburban (1980–1995) Also fits select Buick, Cadillac, Pontiac, Oldsmobile, Isuzu, Jeep models with GM TBI engines What's Included 1 x EGR delete plate 1 x gasket 2 x 5/16 x 18 stainless steel cap screws Notes For off-road or race use only; not legal for street use in some regions No tuning required for mechanical block-off; may trigger EML on some ECUs Estimated install time: 20–40 minutes Throttle Body Optimization Ideal for engine swaps, off-road builds, or emissions system simplification. This kit helps reduce intake turbulence and removes unused components for a cleaner engine bay.

EGR Delete Plate for Honda IAC Idle Air Control Systems This IAC delete plate is designed for Honda Civic, Accord, Odyssey, and Acura platforms equipped with idle air control systems. It allows you to block off the IAC valve for improved throttle response and simplified engine bay layout. Key Benefits Eliminates idle air control valve for cleaner engine setup Precision CNC-machined from aircraft-grade 6061 T6 aluminum Anodized finish for corrosion resistance and durability Compatible with multiple Honda and Acura models from 1990–2001 Fitment Compatibility 1992–2000 Honda Civic 1990–1997 Honda Accord 1995–1997 Honda Odyssey 1997–2001 Honda Prelude 1993–1997 Honda Del Sol 1997–2000 Acura EL 1997 Acura CL 1998–2001 Acura Integra 1999–2004 Acura RL 1996–1997 Isuzu Oasis What's Included 1 x EGR/IAC delete plate 2 x mounting bolts Notes Ensure bolt thread pitch matches your intake manifold For off-road or race use only; not legal for street use in some regions Estimated install time: 15–30 minutes Engine Bay Simplification Perfect for engine swaps, track builds, or simplified intake setups. This plate helps eliminate unnecessary idle control components while maintaining a clean and functional engine bay.

EGR Delete / Block Off Kit for Chevy Silverado & Suburban This 3-piece EGR delete block off kit is designed to eliminate the exhaust gas recirculation system on select  Isuzu Trooper/Hombre GM 4.3L Vortec engines. By removing the EGR pathway, this kit improves intake airflow, reduces carbon buildup, and enhances throttle response. Key Benefits Eliminates EGR flow for cleaner combustion Improves engine performance and airflow Reduces carbon deposits and intake contamination Simple bolt-on installation Fitment Compatibility Isuzu Trooper/Hombre (1999–2001) What's Included 1 x EGR block off plate 1 x intake plug 1 x exhaust block off plate Notes For off-road or racing use only May trigger check engine light if not tuned Professional installation recommended Restore Engine Efficiency By removing the EGR system, this kit helps restore lost horsepower and ensures cleaner combustion, especially on older CPI Vortec engines.

146PCS Body Retainer Clip Assortment – Toyota Applications This OE-style fastener kit includes 146 pieces of commonly used body clips for Toyota vehicles. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, and insulation clips Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Mazda, Isuzu, GM platforms Fitment Compatibility Toyota: Camry, Corolla, Tacoma, Tundra, 4Runner, Celica, MR2, Hilux, Land Cruiser (1985–2022) Also fits: Mazda, Isuzu, GM (select clips) Note: Not compatible with active grille shutters or electronic trim systems Package Includes 146 × Assorted Retainer Clips 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

Rear Window Wiper Arm & Blade Set – Fits Honda CR-V 2007–2011 This rear wiper kit includes a 14" blade and matching wiper arm designed to restore rear visibility and OEM appearance. Compatible with Honda CR-V models from 2007 to 2011. Ideal for replacing faded, cracked, or malfunctioning rear wipers. Key Benefits Direct-fit replacement for rear wiper arm and blade Durable PBT plastic with 30% glass fiber for strength UV-resistant black paint finish prevents fading Precision-cut blade ensures streak-free wiping Fitment Compatibility Honda CR-V (2007–2011) Honda Fit / Jazz (2003+) Acura RDX (2007–2015) Acura MDX (2014–2015) Honda Pilot (2003–2008) Infiniti FX35 / FX45 / FX50 / EX35 / EX37 / Q50 / Q70 (2003–2015) Mitsubishi Ralliart Sportback (2010–2015) Saab 9-2x (2005–2006) Isuzu Axiom (2002–2004) Mazda 2 (2011–2014) What's Included 1 x Rear Wiper Arm (11.4" / 29cm) 1 x Rear Wiper Blade (14.1" / 36cm) Notes Requires removal of original wiper arm before installation Mounting screw not included No instruction manual included Professional installation recommended Rear Visibility Restoration Restore clear rear vision and OEM styling with this replacement wiper kit. Designed for harsh weather conditions, it ensures safe driving and clean rear glass in rain, snow, or dust.