EGR Delete Block-Off Plate Kit – Ford F-Series / Ranger / Bronco (1983–1997) This CNC-machined EGR delete kit eliminates the exhaust gas recirculation system on select Ford engines, improving throttle response and reducing carbon buildup. Designed for off-road and race applications only. Key Features Material: Aircraft-grade 6061-T6 billet aluminum Finish: Precision CNC cut – warp-resistant and corrosion-proof Includes: 1 × EGR block-off plate, 1 × high-temp gasket, 2 × stainless steel pan-head bolts Function: Seals EGR port on throttle body or intake manifold Design: Direct bolt-on – no welding or tuning required Fitment Compatibility Ford F-150 / F-250 / F-350: 1983–1997 | 4.9L (300), 5.0L (302), 5.8L (351 Windsor) Ford Ranger / Bronco: 1983–1997 | V6 / V8 platforms Also Fits: Mustang, Taurus, E-Series Vans, Lincoln Mark VII, Mercury Cougar, and more Note: Not compatible with VGT turbo systems or electronic EGR modules Installation Notes Clean EGR port and mating surface before installation Use included gasket and bolts – torque to factory spec No ECU tuning required Estimated install time: 20–30 minutes ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves Airflow: Eliminates EGR restriction in intake path Reduces Carbon Buildup: Keeps throttle body and intake cleaner Enhances Throttle Response: Improves low-end torque and acceleration Durable Construction: Resists warping, corrosion, and heat fatigue

Universal Fuel Primer Bulb – 6mm to 12mm Hose This hand-operated fuel primer bulb is designed for quick and efficient fuel system priming in marine, automotive, and small engine applications. Ideal for outboard motors, generators, ATVs, and agricultural equipment. Key Features Compatible with 6mm, 8mm, 10mm, and 12mm fuel lines Durable rubber bulb with corrosion-resistant aluminum connectors Built-in one-way valve for directional fuel flow Supports gasoline, diesel, biodiesel, and E85 Compact size: 15cm overall length Fitment Compatibility Marine: Outboard engines (Yamaha, Mercury, Suzuki, Honda), Jet Skis, small boats Automotive: Carbureted engines, fuel transfer systems, off-road vehicles Power Equipment: Generators, lawn mowers, pressure washers Agricultural: Tractors, sprayers, diesel pumps Package Includes 1 x Fuel Primer Bulb Installation Notes Connect inline between fuel tank and engine Ensure arrow direction matches fuel flow Prime until fuel reaches carburetor or injector Shipping & Warranty Ships from US warehouse Free shipping within USA & Australia 30-day return policy 2-year product guarantee

AN10 Flare Bulkhead Fitting – CNC Aluminum | Black Anodized This universal AN10 bulkhead fitting is CNC-machined from aircraft-grade 6061-T6 aluminum and anodized in black for corrosion resistance. Designed for high-performance fuel systems, it provides secure sealing and unrestricted flow for fuel, oil, or coolant applications. Key Features Size: AN10 | Thread: Flare | Type: Straight Bulkhead Material: 6061-T6 aluminum – CNC-machined for precision Finish: Black anodized – corrosion-resistant and durable Washer: Included – oil-resistant sealing washer Compatibility: Gasoline, diesel, alcohol, E85, coolant Fitment Applications Fuel cells, surge tanks, oil coolers, radiators Universal fit for race cars, street builds, off-road setups Recommended mounting hole: 11/16" (approx. 17.5mm) Package Includes 1 × AN10 Bulkhead Fitting 1 × Sealing Washer Installation Notes Drill mounting hole to recommended diameter Insert fitting through bulkhead and secure with nut Use PTFE tape or O-ring for enhanced sealing if needed Restore Performance & Reliability Leak-Free Seal: Prevents fluid seepage under pressure High Flow Efficiency: Radiused entry reduces turbulence and restriction Corrosion Protection: Anodized finish resists fuel and environmental damage Universal Fitment: Compatible with most AN10 hose ends and adapters Motorsport-Grade Build: Ideal for demanding fuel and oil systems

292PCS Body Retainer Clip Assortment – Multi-Vehicle Applications This OE-style fastener kit includes 292 pieces of commonly used body clips for Toyota, GM, Mazda, Isuzu, and more. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, insulation, hood seal, headlight/grille nuts Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, GM, Mazda, Isuzu, Honda, Mitsubishi, Nissan Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Hilux, Celica, MR2, Tercel, Land Cruiser, Tacoma, T100 GM: Chevrolet Nova, Prizm, Pontiac Vibe, Cadillac, GMC Mazda / Isuzu / Honda / Nissan / Mitsubishi: Compatible with select models Years: 1985–2022 Note: Not compatible with active grille shutters or electronic trim systems Package Includes 292 × Assorted Retainer Clips (20+ types) 1 × Screwdriver 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size (5mm–10mm) Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

146PCS Body Retainer Clip Assortment – Toyota Applications This OE-style fastener kit includes 146 pieces of commonly used body clips for Toyota vehicles. Designed to replace broken or missing retainers on fenders, doors, bumpers, hoods, and trim panels, it ensures secure fitment and restores factory appearance. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: Push-type, screw-type, grommet, and insulation clips Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Mazda, Isuzu, GM platforms Fitment Compatibility Toyota: Camry, Corolla, Tacoma, Tundra, 4Runner, Celica, MR2, Hilux, Land Cruiser (1985–2022) Also fits: Mazda, Isuzu, GM (select clips) Note: Not compatible with active grille shutters or electronic trim systems Package Includes 146 × Assorted Retainer Clips 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

150PCS Universal Retainer Clip Kit – Multi-Vehicle Applications This complete fastener assortment includes 150 push-type rivet clips in 6 common sizes, ideal for repairing or replacing broken retainers on bumpers, fenders, doors, hoods, and interior panels. Designed for universal fitment across major vehicle brands. Key Features Material: Automotive-grade black nylon – UV-resistant and durable Includes: 6 sizes of push-type clips for 8mm / 10mm holes Packaging: Organized in labeled storage box with size chart Function: Replaces worn or missing clips for body panels and trim Design: Matches OE dimensions for Toyota, Honda, Mazda, Chevrolet, Ford, VW, Hyundai, and more Fitment Compatibility Toyota: Camry, Corolla, 4Runner, Highlander, Prius, Sienna, Yaris Honda: Civic, Accord, CR-V, Odyssey, Fit Mazda: 3, 6, CX-5, CX-7 Chevrolet: Cruze, Malibu, Tahoe, Suburban Ford: Focus, Fusion, Mustang, Edge Hyundai / Kia / VW / BMW / Audi / Mercedes-Benz: Compatible with select models Note: Universal fitment for vehicles from 1985–2022. Not compatible with active grille shutters or electronic trim systems. Package Includes 150 × Push-Type Retainer Clips (6 sizes) 1 × Storage Box with Clip Size Chart Installation Notes Use trim removal tool for safe disassembly Match clip size using included chart Push or screw into designated hole size Restore Performance & Reliability Fixes Loose Panels: Replaces broken or missing clips to secure body components Reduces Noise: Eliminates rattling and vibration from loose trim Restores OEM Fit: Matches factory clip geometry for seamless installation Improves Appearance: Maintains clean, flush panel alignment Durable & Versatile: Resistant to heat, moisture, and UV exposure

LS Swap Steam Port Adapter – 1-1/4" Hose Barb w/ 1/8" NPT This billet aluminum adapter allows you to conveniently add a steam port or sensor connection to your top radiator hose during an LS engine swap. Ideal for coolant venting or gauge installation. Key Features Material: CNC-machined T6061 billet aluminum Finish: Anodized silver – corrosion & heat resistant Port: Integrated 1/8" NPT female thread Function: Supports steam venting, coolant recirculation, or sensor installation Fitment: 1-1/4" outer diameter radiator hose Fitment Compatibility Engine Platforms: GM LS Gen III / Gen IV Examples: LS1, LS2, LS3, LS6, LQ4, LQ9, LM7, LY6 Note: Not compatible with LT series engines Package Includes 1 × Hose Barb Coupler with 1/8" NPT Port Installation Notes Cut radiator hose and insert adapter inline Use hose clamps to secure both ends Apply thread sealant or PTFE tape to NPT port before installing sensor or fitting Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 180-day product warranty

Remote Key Fob – 3-Button | OEM Style This remote head key fob replaces lost or damaged keys for a wide range of Ford, Lincoln, Mercury, and Mazda vehicles. Includes electronics, chip, and battery – ready for cutting and programming. Key Features FCC ID: CWTWB1U212 / CWTWB1U345 / CWTWB1U331 / GQ43VT11T OEM Part Numbers: 8L3T-15K601-AA / F8DB-15K601-AA / 2L3T-15K601-AA / 2L3T-15K601-AB / 8S4Z15K601A Buttons: Lock / Unlock / Panic Battery: CR2032 (included) Includes: Circuit board + transponder chip Fitment Compatibility Ford: F-150 / Focus / Escape / Explorer / Mustang / Fusion / Expedition / Taurus / Flex / Freestar / Freestyle / Thunderbird / GT / Crown Victoria / Edge / Excursion (1999–2016) Lincoln: LS / MKS / MKX / MKZ / Navigator / Town Car / Aviator / Zephyr (2001–2015) Mercury: Grand Marquis / Mariner / Milan / Montego / Monterey / Mountaineer / Cougar / Sable / Tracer / Marauder (1999–2011) Mazda: Tribute (2008–2011) Note: Only compatible with vehicles using remote head keys. Not suitable for smart key or push-button start systems. Package Includes 1 x Remote Key Fob – 3-button 1 x CR2032 Battery (pre-installed) Programming Notes Requires programming by a qualified automotive locksmith or dealership Some Ford models support DIY programming if you have two working keys Key must be cut to match your ignition Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

Standalone Wiring Harness – LS Vortec DBW (2003–2007) This plug-and-play standalone wiring harness is designed for LS-based Vortec engines with drive-by-wire throttle bodies and 4L60E automatic transmissions. Ideal for LS swap projects in muscle cars, trucks, and off-road builds. Key Features Supports LS 4.8L / 5.3L / 6.0L DBW engines (2003–2007) Compatible with 4L60E transmission only Includes OBD-II DLC port, MIL light, tach, speedo, TCC, and park/neutral wiring Delphi OEM connectors + TXL high-temp wire Sliding grommet seal for firewall pass-through Supports Multec injectors; EV6 adapters available upon request Fitment Compatibility Engine Platforms: LM7 – 5.3L LQ4 / LQ9 – 6.0L LR4 – 4.8L Transmission: 4L60E only Throttle: Drive-by-wire (DBW) only – not compatible with cable throttle Package Includes 1 x Standalone Wiring Harness – pre-terminated 1 x OBD-II DLC port 1 x Instruction Manual Installation Notes Requires 4-wire hookup: switched power, constant power, ground, fuel pump PCM mounting length: 4–5 ft from rear cylinder head Professional installation recommended Shipping & Warranty Free FedEx Express shipping (USA & Australia) Estimated delivery: 3–8 business days 30-day return policy 2-year product guarantee

Brass Thread Adapter – 1/8 NPT Female to 1/8 BSPT Male This universal brass adapter fitting allows seamless connection between US-standard NPT female ports and UK/Euro BSPT male threads. Ideal for oil pressure sensors, fuel gauges, turbo boost lines, and coolant steam ports. Key Features Thread Type: 1/8" NPT (female) to 1/8" BSPT (male) Material: Industrial-grade brass – corrosion resistant Finish: Machined brass with anti-oxidation coating Pressure Rating: Up to 300 PSI Temperature Range: -40°C to 120°C Applications Oil pressure sensor adapters Fuel pressure gauge fittings Turbo boost sensor lines Coolant steam port adapters Universal fit for automotive, marine, and industrial use Package Includes 1 x Brass Adapter – 1/8 NPT Female to 1/8 BSPT Male Installation Notes Use thread sealant or PTFE tape for leak-free installation Do not overtighten – brass threads may deform Verify thread compatibility before installation Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

Left Driver Headliner Roof Trim – Beige Interior Panel This headliner roof trim is a direct-fit replacement for the left driver side of 2004–2008 Ford F-150 and 2006–2008 Lincoln Mark LT models. Designed to restore OEM interior appearance and secure roof lining near the door pillar. Key Benefits Restores clean OEM look to interior roof lining Direct replacement for factory part #4L3Z-15264B83-AAC Durable molded plastic with textured beige finish Easy installation – clips into existing mounting points Compatible with XL, XLT, Lariat, FX4, King Ranch trims Fitment Compatibility Ford F-150 – 2004, 2005, 2006, 2007, 2008 Lincoln Mark LT – 2006, 2007, 2008 ⚠️ Fits Left (Driver) Side only What's Included 1× Left Driver Side Headliner Roof Trim – Beige Notes Color: Beige (may vary slightly from faded OEM panels) Material: ABS plastic – impact and heat resistant Condition: 100% brand new Ships from US warehouse with free shipping Restore Interior Fit & Finish Replace cracked or missing roof trim with this OEM-style panel to restore your truck’s interior. Ideal for repairs, restorations, or trim upgrades on Ford F-150 and Lincoln Mark LT models.

Fuel Injector – Ford / Lincoln / Mercury V8 (1990–2005) This OEM-style Bosch fuel injector delivers precise fuel atomization for Ford, Lincoln, and Mercury V8 engines. Featuring a 4-hole spray pattern and high-impedance coil, it ensures smooth combustion and throttle response. Key Features OEM reference: 0280150943 / 0280150939 / F1ZE-A2B Connector type: EV1 Jetronic Spray pattern: 4-hole disc – 15° cone Coil type: High impedance – compatible with stock ECU Seal: Viton O-rings – fuel and heat resistant Filter: Basket filter at inlet Fitment Compatibility Ford: F-150 / F-250 / F-350 – 5.0L / 5.4L / 5.8L V8 (1990–2003) Mustang – 4.6L V8 (1996–2004) Expedition / Excursion – 4.6L / 5.4L V8 (1997–2005) E-Series Vans – E-150 / E-250 / E-350 – 4.6L / 5.4L / 5.8L / 7.5L V8 (1990–2003) Bronco – 5.0L / 5.8L V8 (1991–1996) Lincoln: Navigator – 5.4L V8 (1998–1999) Town Car – 4.6L V8 (1991–1994) Mercury: Grand Marquis – 4.6L V8 (1992–1997) Note: Only compatible with EV1-style injector connectors. Not suitable for EV6 or newer platforms. Package Includes 1 / 4 / 8 x Fuel Injectors (based on selection) Installation Notes Lubricate O-rings before installation Recommended to replace injectors as a matched set Idle calibration may be required for optimal performance Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

Rear Shock Absorber – Lincoln MKZ (2013–2020) This Rear shock absorber is designed for Lincoln MKZ vehicles equipped with CCD (Continuously Controlled Damping). It restores factory ride comfort, electronic damping control, and suspension response. Key Benefits Electronically adjustable damping via CCD system Remanufactured using original OE shock body New seals, connectors, wiring harness, and fluid chamber Maintains compatibility with factory suspension systems Backed by 2-year warranty and 30-day return policy Fitment Compatibility Lincoln MKZ 2.0L Hybrid – 2013–2020 Lincoln MKZ 3.7L V6 – 2013–2016 Lincoln MKZ 2.0L EcoBoost – 2013–2020 Note: Only compatible with vehicles equipped with CCD electronic suspension. Please confirm via VIN if unsure. Replaces OEM Part Numbers Rear Left: DG9Z18125B, EG9Z18125B, EG9Z18125C, HG9Z18125D, HG9Z18125E Rear Right: DG9Z18125A, EG9Z18125A, EG9Z18125D, HG9Z18125C, HG9Z18125B What's Included 1 x Rear Shock Absorber – Fits Left or Right Notes Fits rear axle – left or right side Does not include mounting bolts or CCD sensors Professional installation recommended Estimated install time: 60–90 minutes Suspension System Restoration Ideal for resolving harsh ride, CCD error codes, or rear-end instability. This shock absorber restores OEM damping response and ensures safe, smooth driving under all road conditions.

Front Shock Absorber – Lincoln MKZ (2013–2020) This OEM remanufactured front shock absorber is designed for Lincoln MKZ vehicles equipped with CCD (Continuously Controlled Damping). It restores factory ride comfort, electronic damping control, and suspension response. Key Benefits Electronically adjustable damping via CCD system Remanufactured using original OE shock body New seals, connectors, wiring harness, and fluid chamber Maintains compatibility with factory suspension systems Backed by 2-year warranty and 30-day return policy Fitment Compatibility Lincoln MKZ 2.0L Hybrid – 2013–2020 Lincoln MKZ 3.7L V6 – 2013–2016 Lincoln MKZ 2.0L EcoBoost – 2013–2020 Note: Only compatible with vehicles equipped with CCD electronic suspension. Please confirm via VIN if unsure. Replaces OEM Part Numbers Front Left: DG9Z18124B, DG9Z18124V, EG9Z18124D, HG9Z18124C, HG9Z18124D Front Right: DG9Z18124A, DG9Z18124U, EG9Z18124C, HG9Z18124B, HG9Z18124E What's Included 1 x Front Shock Absorber – Fits Left or Right Notes Fits front axle – left or right side Does not include mounting bolts or CCD sensors Professional installation recommended Estimated install time: 60–90 minutes Suspension System Restoration Ideal for resolving harsh ride, CCD error codes, or front-end instability. This shock absorber restores OEM damping response and ensures safe, smooth driving under all road conditions.