Search results for "turbo kits":

Features:H13 + H13 （High/Low Beam）+ 9145 (fog light) LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.Especially designed for upgrading the Headlight,Fog light,Daytime Running LightBulb Size: H13 + H13 （High/Low Beam）+ 9145 (fog light)100% Brand New and High quality.Use COB Led technoloty, amazing super bright lightingLED Type: CREE LED chip high powerApplication: Headlight / Fog Driving Light / Daytime Running LightBeam Type: High Beam / Low Beam / 360°Beam AngleColor Temperature: 8000K Ice BlueLumens: 8000 Lumens Per BulbWorking Voltage: DC 12V to 24V55W Per Bulb, Low Power ConsumptionNo delay to light up, Faster on/off response timeLifespan: 30,000 working hours ,Adopt imported chips, stable quality, long service lifeAluminum heat sink design,built-in automotive circuit to prevent electronic interference.The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification requiredEnergy saving, environmental protection, Stable performance, through strict test, Use safer driving in the carPackage Includes :BRAND NEW 6PCH13 + H13 （High/Low Beam）+ 9145 (fog light) LED Bulbs 8000K Ice BlueInstall Caution:1. As a safety precaution, make sure that the car has had time to cool down properlybefore starting the installation process.2. Put the vehicle into park or make sure it is securely in gear.3. Make sure to have the ignition turned off and the keys removed.4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch thebulbs with your fingers, as this will cause blotting.6. Fully examine the connection of the contact points, ports and the wires as faultyconnections can cause lighting problems.7. Make certain that the en of the bulb does not come in contact with the interior

Front & Rear Catalytic Converter Set – Toyota Sienna 3.3L AWD (2004–2006) This EPA-compliant catalytic converter set includes both front and rear units designed to restore emissions performance on Toyota Sienna 3.3L AWD models. Built from stainless steel and engineered for direct fitment, it meets federal emissions standards and improves exhaust flow. Key Features OEM Reference Numbers: 16392 / 16393 Material: Stainless steel tubing with ceramic substrate Fitment: Direct bolt-on replacement – may require minor modification O2 Sensor Ports: Yes (pre-installed) Compliance: 48-State EPA legal – not for use in CA, CO, NY, ME Fitment Compatibility Vehicle: Toyota Sienna 3.3L AWD Years: 2004, 2005, 2006 Note: Not compatible with FWD models or vehicles requiring CARB-certified converters Package Includes 1 × Front Catalytic Converter 1 × Rear Catalytic Converter Installation Notes Professional installation recommended May require trimming or welding at Y-pipe junction Does not include oxygen sensors or mounting hardware Estimated install time: 1.5–2.5 hours Restore Performance & Reliability Fixes Emissions Faults: Resolves P0420/P0430 codes and restores EPA compliance Improves Exhaust Flow: High-flow ceramic substrate enhances engine breathing Reduces Fuel Consumption: Optimized backpressure improves combustion efficiency Durable Construction: Stainless steel resists corrosion and thermal fatigue Reliable Fitment: Engineered for AWD Sienna models with factory exhaust layout

Magnetic Ride Front Strut for Cadillac Escalade  This Magnetic Ride front shock absorber strut is engineered to restore premium suspension performance in 2015–2019 Cadillac Escalade models. Featuring a complete coil-over assembly, it ensures smooth handling, precise damping, and factory-level comfort. Compatible with GM part numbers 84977478, 84061228, and ACDelco 580-1108, this strut is ideal for vehicles equipped with Magnetic Ride Control systems. Key Benefits Direct-fit replacement for GM 84977478, 84061228, ACDelco 580-1108 Supports Magnetic Ride Control (MRC) suspension systems Includes coil spring and mounting hardware Improves ride stability, comfort, and shock absorption Fitment Compatibility Cadillac Escalade (2015–2019) What's Included 2 x Front Strut Assemblies with Coil Springs 4 x Mounting Screws with Nuts Notes Only compatible with vehicles equipped with Magnetic Ride Control Fits both driver and passenger side Professional installation recommended Boost Suspension Performance Designed to work seamlessly with GM’s Magnetic Ride Control system, this strut improves damping response and reduces body roll during cornering and towing. Quick Installation for Instant Results Pre-assembled and ready to install, this front strut requires no special tools. Simply remove the old unit and bolt this in for immediate ride quality improvement. Durable OEM-Grade Construction Built from high-strength materials and tested to OEM standards, this strut offers long-lasting performance and reliability under all driving conditions.

Gloss Black Front Grille Set – Chevrolet Malibu (2019–2020) This 3-piece front grille kit includes upper and lower grille sections with matching molding, designed to upgrade the front-end appearance of your Chevrolet Malibu. Made from durable ABS plastic with a gloss black finish, it offers a sleek, sporty look while maintaining OE fitment. Key Features Material: Automotive-grade ABS plastic Finish: Gloss black – UV-resistant, fade-proof Design: OE-style replacement – no modification required Fitment: Direct bolt-on with factory clips and tabs Function: Enhances front-end styling and replaces damaged or faded grilles Fitment Compatibility Chevrolet Malibu: 2019–2020 Trims: LS / LT / Premier Note: Not compatible with RS / Redline editions or models with active grille shutters Package Includes 1 × Front Upper Grille 1 × Front Lower Grille 1 × Matching Grille Molding Installation Notes Remove front bumper for access Use factory mounting points – no drilling required Estimated install time: 1–1.5 hours Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 3-year product guarantee

Fuel Injector – Mitsubishi 2.0L / 2.4L MIVEC (2014–2019) This OEM-style high impedance fuel injector restores precise fuel delivery for Mitsubishi MIVEC engines. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Number: 1465A412 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Mitsubishi Lancer: 2015–2017 | 2.0L / 2.4L MIVEC Mitsubishi Outlander: 2014–2019 | 2.4L MIVEC Mitsubishi Outlander Sport: 2014–2019 | 2.0L MIVEC Mitsubishi Outlander PHEV: 2018–2019 | 2.4L Hybrid Note: Not compatible with turbocharged or diesel platforms Package Includes 1 × Fuel Injector – OEM# 1465A412 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

Flow Matched Fuel Injector – Honda Civic 1.8L (2006–2011) This high-impedance fuel injector is engineered to match OEM flow rates and coil resistance for Honda R18A 1.8L engines. It ensures precise fuel atomization, improved throttle response, and optimized MPG. Key Features OEM reference: 16450-RNA-A01 / FJ785 / FJ1045 High-impedance coil – compatible with factory ECU Viton O-rings – fuel and heat resistant Flow matched within ±2% tolerance Direct-fit replacement – no programming required Fitment Compatibility Honda Civic: 2006–2011 – 1.8L I4 (R18A) Honda CR-Z: 2011–2014 – 1.5L I4 Hybrid (LEA) Honda Fit: 2007–2014 – 1.5L I4 (L15A) Note: Not compatible with Si or K20/K24 engine variants Package Includes 1 x Fuel Injector – flow matched Installation Notes Disconnect battery before installation Lubricate O-rings and seat evenly into fuel rail Recommended to replace all injectors as a set Shipping & Warranty Free shipping within USA Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 3-year product guarantee

2"–3" Rear Lift Shackles – Dodge RAM 1500 Mega / 2500 / 3500 (2003–2013) This adjustable rear lift shackle kit raises the rear of your RAM truck by 1–2 inches depending on bolt position, helping eliminate factory rake and improve towing stance. Designed for trucks with leaf springs ending below the rear hangers. Key Features Material: CNC laser-cut carbon steel – powder-coated black Bushing: Polyurethane – greaseable, long-life, abuse-resistant Lift Range: 1" or 2" depending on bolt hole selection Design: Bolt-on replacement – reuses factory hardware Function: Levels rear suspension, improves towing and off-road clearance Fitment Compatibility Dodge RAM 1500 Mega Cab: 2003–2013 | 8 Lug | Leaf spring width: 3" Dodge RAM 2500 / 3500: 2003–2013 | All cabs | Gas or Diesel | 2WD / 4WD Note: Only compatible with leaf springs that end below rear hangers. If your leaf spring ends above the hanger, this kit will lower the rear. Contact us for correct configuration. Package Includes 2 × Adjustable Rear Lift Shackles Pre-installed Polyurethane Bushings Installation Notes Remove factory shackles and reuse OEM bolts Choose bolt hole for desired lift height (1" or 2") Grease bushings before installation Estimated install time: ~1 hour Alignment recommended after install Restore Performance & Reliability Improves Rear Stance: Eliminates factory rake for balanced appearance Enhances Clearance: Supports up to 35" tires Preserves Ride Quality: Maintains factory spring geometry Durable Construction: Resists rust, compression, and bushing wear

Air Suspension Solenoid Valve Block – Mercedes-Benz Platforms This air suspension solenoid valve block controls airflow and pressure distribution to the air springs and dampers in your Mercedes-Benz vehicle. It replaces common OEM units and restores proper suspension function and ride comfort. Key Benefits Direct-fit replacement for OEM solenoid valve block Controls air pressure routing from compressor to air struts Prevents compressor overload and air leaks High-quality aftermarket part with 2-year warranty Fitment Compatibility Mercedes-Benz ML-Class (W164/W166) – ML280 / ML300 / ML320 / ML350 / ML420 / ML450 / ML500 / ML63 AMG Mercedes-Benz GL-Class / GLS-Class (X164/X166) – GL320 / GL350 / GL450 / GL500 / GL550 / GLS450 / GLS550 / GLS63 AMG Mercedes-Benz S-Class (W221/W222) – S320 / S350 / S400 / S500 / S550 / S600 / S63 / S65 AMG Mercedes-Benz R-Class (W251/V251) – R300 / R350 Mercedes-Benz E-Class (W212) – E350 / E500 / E63 AMG Mercedes-Benz CLS-Class (X218) – CLS Shooting Brake Mercedes-Benz C-Class (W205) – C300 / C350 / C63 AMG Replaces OEM Part Numbers A2123200358 A0993200058 2513200058 What's Included 1 x Air Suspension Solenoid Valve Block Notes Not a Mercedes-Benz original part; high-quality aftermarket replacement Professional installation recommended Includes basic installation guide Covered by 2-year warranty Suspension System Restoration Ideal for resolving air suspension faults, compressor overwork, or uneven ride height. This valve block restores proper air distribution and ensures smooth, balanced driving.

Fitment:2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Dodge RAM 1500 (2019 1500 CLASSIC)2010-2018 Dodge RAM 25002010-2018 Dodge RAM 3500Safe driving: 6000k color temperature and 2400LMS means you may have the clear view as in the noon, which will give you comfortable and safe driving. Specification: 121 degree horizontal beam for maximum coverage. Built in additional side LED chips, the cubes work light is engineered to take lighting visibility to new heights.NEW Full Reflector Design, advanced qualified 60W(12pcs*5W) LED chips delivered 9,000 lumens combo beam runs at 6,000K cool white light will effectively light up your dark road.IP67 waterproof rate, die-cast aluminum housing and poly-carbonate lens for optimal performance. This LED light bar has excellent waterproof, dust-proof, quake proof performance. Technology, safety & performance all in one.High-quality vent valve can effectively extend the lifespan of the light bar to over 50,000 hours!With working voltage of 9-30V DC,2 Years Warranty and good after-sales service!Size: Side Cube _ 4'' 60WChoosing the right LED Light Bar can greatly improve safety and your enjoyment of driving at night.LED light bar feature bright and efficient LEDs, provides high density intense and smooth beam.Wattage: 45WLED Source: LEDsColor Temperature: 6000KIP Rating: IP67Working Voltage: 9 - 30V DCWorking Temperature: -40~ 85 degreesLumens / Luminous flux: 9,000 LumensWorking Lifespan: over 50,000 hoursMaterial: Die-cast aluminum housing; PC LensDirectly mount to the factory bolts under hood hinge. Allow you to install light pod on Driver & Passenger Side to extend your side view in the dark.Exclusively designed custom mounting brackets allow for a direct and easy bolt-on installation. Package Include:ONE PAIR of Custom Light Mounting BracketsONE PAIR of 4 inch Light PodsONE Wiring Hardness with SwitchALL needed installing hardware

Front Air Suspension Strut – Rolls-Royce Ghost RR4 / Wraith RR5 (2010–2019) This OEM remanufactured front air suspension strut is designed for Rolls-Royce Ghost RR4, Ghost EWB, and Wraith RR5 models equipped with ADS (Adaptive Damping System). It restores factory ride height, damping control, and air spring performance. Key Benefits Remanufactured using original OE shock body New air bladder, seals, connectors, and wiring harness Aluminum top mount and bottom fork for secure fitment Compatible with ADS (Adaptive Damping System) Backed by 2-year warranty and 30-day return policy Fitment Compatibility Rolls-Royce Ghost RR4 (2010–2019) Rolls-Royce Ghost EWB RR4 (2012–2019) Rolls-Royce Wraith RR5 (2013–2019) Note: Compatible with vehicles equipped with pneumatic suspension and ADS system Replaces OEM Part Numbers Front Left: 37106862551, 37106864533, 37106892845, 37106892855, 37106864531, 37106868823, 37106888033, 37106892859, 37116851607, 37116850227 Front Right: 37106864534, 37106862144, 37106864532, 37106868824, 37116850228, 37106862552, 37106888034, 37106892860, 37106892846, 37106892856, 37116851608 What's Included 1 x Front Air Suspension Strut – Fits Left or Right Notes Fits front axle – left or right side Does not include mounting bolts or ADS sensors Professional installation recommended Estimated install time: 60–90 minutes Suspension System Restoration Ideal for resolving air leaks, ADS error codes, or front-end instability. This strut restores OEM damping response and ensures safe, smooth driving under all road conditions.

Application :For Ford 6.0L Diesel 09/2003 2004 2005 2006 2007 2008 2009 2010For Ford LCF 4.5L 2006 2007 2008 2009 2010For International Maxxforce 5 2004 2005 2006 2007 2008 2009 2010 Package Include:1x Fuel Injector Pressure RegulatorNotice:* Professional installation is highly recommended (No Instruction Included)* For any needs please contact us

Fuel Injector – Toyota Corolla / Auris / Avensis (2003–2013) This OEM-style high impedance fuel injector restores precise fuel delivery for Toyota 1.8L engines. Built to match factory specifications, it ensures smooth idle, improved throttle response, and optimal combustion efficiency. Key Features OEM Part Numbers: 23250-0D030 / 23209-0D030 / 0280156019 Material: Composite plastic + metal body Seal: Pre-installed Viton O-ring – high-temp & fuel-resistant Design: Multi-hole spray pattern for fine atomization Function: Restores fuel delivery, reduces misfires and fuel trim errors Fitment Compatibility Engine Platforms: Toyota 1ZZ-FE / 2ZR-FE | 1.8L I4 EU Market: Corolla SED/WG (ZZE12#), Corolla Verso, Auris, Avensis GR Market: Corolla CE120/140, NZE12#/141, ZZE14#/150 Asia / India: Corolla / Altis NZE120, ZZE12#, ZRE14# South America: Corolla ZZE12#, ZZE14#, ZRE14# South Africa: Corolla ZZE12#, ZZE150 US Market: Corolla ZRE14#, ZZE14# Note: Not compatible with 2.0L or hybrid platforms Package Includes 1 × Fuel Injector – OEM# 23250-0D030 Installation Notes Direct fit into factory intake manifold Clean injector seat before installation Recommended to replace all injectors for balanced performance Restore Performance & Reliability Fixes Fuel Delivery Issues: Resolves rough idle, poor acceleration, and cold start problems Improves Efficiency: Restores proper spray pattern and fuel atomization Reduces Emissions: Helps maintain optimal air-fuel ratio and combustion Durable Construction: Resistant to fuel corrosion and engine heat OEM Fitment: Matches factory specs for plug-and-play installation

Front Coil Spring Shock Absorber Strut Assembly – OEM-Compatible This complete front strut assembly includes coil spring, shock absorber, and upper mount pre-installed. Designed for Chevrolet Tahoe and compatible GM platforms, it restores ride comfort and handling without the need for spring compression tools. Key Benefits Pre-assembled coil spring and strut – ready to install High-strength steel body with corrosion-resistant finish Oil-filled hydraulic damping for smooth ride Direct-fit replacement for OEM units Fitment Compatibility Chevrolet Silverado 1500 (2007–2014) – Excludes electronic suspension & 22" wheels Chevrolet Avalanche (2007–2013) Chevrolet Suburban 1500 (2007–2014) Chevrolet Tahoe (2007–2019) GMC Sierra 1500 (2007–2013) GMC Yukon / Yukon XL 1500 (2007–2019) Cadillac Escalade / ESV / EXT (2007–2014) Replaces OEM Part Numbers 15886465, 15909491, 15918522, 15909191 15911938, 15939374, 19209555, 19300031 19353945, 19353949, 20810270, 25845446 25845438, 25845447, 25888675, 25888683 25888684, 540358, 580280, 580287 580304, 580375, SK-2806, SK-2954 What's Included 2 x Front Coil Spring Strut Assemblies (Left & Right) Notes Not compatible with electronic suspension systems Not compatible with vehicles equipped with 22-inch wheels No special tools required for installation Estimated install time: 60–90 minutes Suspension Restoration Ideal for resolving front-end sagging, poor handling, or excessive bounce. This strut set restores factory ride height and damping performance, ensuring safe and comfortable driving.

Compatibility2009 2010 2011 2012 Dodge RAM 15002010-UP Dodge RAM 2500/3500SpecificationsThis kit allow you to upgrade your fog light system with 3" LED light pod and a Hidden Bumper Light Bar.Fit into your bumper place directly,no drilling need.Lights compatibility: 20" 22" 30" 32" Light Bar & 3inch Cube LED light podsLocation: Fog light locationColor: Black powder coatedMaterial: iron FeaturesCompact windshield double LED light bracket mounts.Increase the car / truck safe and good looking.Energy conservation,waterproof,dustproof and shock resistant.Durable aluminum perfect against harsh environment and conditions. Package Included2 Pair Fog light mount bracketsNeccesary hardware is includedInstallation instruction(Fog Light are NOT included)

FITS:1997 Ford F-150 2WD1998 Ford F-150 2WD1999 Ford F-150 2WD2000 Ford F-150 2WD2001 Ford F-150 2WD2002 Ford F-150 2WD2003 Ford F-150 2WD DESCRIPTION:2" Front Billet Lift SpacersBillet Aluminum for superior strengthHeat Treated for nearly 3 times the strength of other Aluminum AlloysRigorously tested off road to guarantee safetyPrecision CNC milled for a perfect fitCorrosion & Oxidation Resistant finish