Search results for "suspension":

DPF/CAT + EGR + Throttle Valve Delete Kit – Dodge Ram 6.7L Cummins (2013–2017) This complete emissions delete kit removes the restrictive diesel particulate filter (DPF), catalytic converter (CAT), EGR valve/cooler, and throttle valve actuator from your 6.7L Cummins engine. Designed for off-road and race use, it improves airflow, lowers EGTs, and enhances throttle response. Key Features Material: TIG-welded SUS409 stainless steel – 2mm wall thickness Pipe Diameter: 4" inlet – mandrel bent for smooth flow Function: Eliminates soot buildup, reduces regens, improves turbo spool Design: Includes coolant bypass hose – no blocked coolant lines Finish: Raw stainless – corrosion and heat resistant Fitment Compatibility Dodge Ram 2500 / 3500: 2013–2017 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or EGR-retained configurations Package Includes 2 × Muffler Delete Pipes 2 × Pipe Clamps 1 × Hanger Bracket 3 × Bolts 1 × EGR Block-Off Plate with O-Rings 1 × Front Block-Off Plate 1 × Rear Block-Off Plate 1 × Coolant Standpipe Adapter with O-Ring 1 × Locking Collar with Set Screws 1 × Support Bracket 1 × Threaded Stud + Flange Nut + Spacer 1 × Coolant Hose 3 × Hex Head Bolts (5/16") 1 × Hex Head Bolt (1/4") 4 × Locking Nuts (1 Small + 3 Large) 1 × Throttle Valve Delete Tube + Gasket 4 × Flange Bolts Installation Notes Disconnect battery and drain coolant before installation Remove DPF, CAT, EGR valve/cooler, and throttle valve actuator Install block-off plates, coolant bypass, and delete pipe Race tuning required to disable emissions functions and avoid fault codes Estimated install time: 3–5 hours ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves Airflow: Removes intake and exhaust restrictions Lowers EGTs: Reduces exhaust gas temperatures by up to 200°F Boosts Throttle Response: Eliminates actuator lag and backpressure Supports Tuning: Ideal for performance builds and towing applications

EGR Delete Kit – Ford 6.7L Powerstroke (2011–2019) This complete EGR delete kit removes the factory exhaust gas recirculation system from your Ford 6.7L Powerstroke engine, improving performance, reliability, and airflow. Ideal for off-road and race-use applications. Key Features Material: TIG-welded aluminum alloy + stainless steel + high-temp silicone Includes: Intake damper, exhaust manifold barrier plate (EGT sensor ready), coolant closing panel, radiating pipe, hose clamp, vacuum cover, pressure sensor bracket + hardware Function: Eliminates EGR flow, reduces soot buildup, lowers exhaust gas temperatures Improves: Turbo spool-up, throttle response, fuel economy, coolant temperature (drops ~5–8°C) Fitment Compatibility Ford Super Duty: F250 / F350 / F450 / F550 Years: 2011–2019 Engine: 6.7L OHV V8 Powerstroke Turbo Diesel – VIN Code “T” Note: Not compatible with California CARB-certified vehicles or Cab & Chassis commercial platforms Package Includes 1 x Exhaust Manifold Barrier Plate (EGT sensor ready) 1 x Intake Damper 1 x Coolant Closing Panel 1 x Radiating Pipe 1 x Stainless Steel Hose Clamp 1 x Vacuum Cover 1 x Pressure Sensor Bracket 1 x Pressure Sensor Bracket Hardware 3 x M8 Bolts 3 x M8 Flat Washers 3 x Zip Ties Installation Notes Professional installation recommended Requires removal of EGR valve and cooler ECU tuning required to prevent check engine light Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

CAT & DPF Delete Pipe – Dodge Ram 6.7L Cummins (2010–2019) This race-grade delete pipe eliminates the factory diesel particulate filter (DPF) and catalytic converter (CAT) from your 6.7L Cummins exhaust system. Designed for off-road use, it improves exhaust flow, lowers EGTs, and enhances turbo response. Key Features Material: TIG-welded SUS409 stainless steel – 2mm wall thickness Pipe Diameter: 4" mandrel bent for optimal flow Function: Removes restrictive emissions components – CAT & DPF Design: Includes OEM-style hanger bracket and clamps Finish: Raw stainless – corrosion and heat resistant Fitment Compatibility Dodge Ram 2500 / 3500: 2010–2019 | 6.7L Cummins Turbo Diesel Note: Not compatible with Cab & Chassis platforms or emissions-retained configurations Package Includes 2 × Muffler Delete Pipes 2 × Pipe Clamps 1 × Hanger Bracket 3 × Bolts Installation Notes Disconnect battery before installation Remove factory DPF and CAT components Install delete pipe using included clamps and hanger Race tuning required to disable emissions functions and avoid fault codes Estimated install time: 2–3 hours ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves Exhaust Flow: Removes backpressure and flow restrictions Lowers EGTs: Reduces exhaust gas temperatures by up to 200°F Boosts Turbo Response: Faster spool and throttle reaction Supports Tuning: Ideal for performance builds and towing applications

Steering Wheel Clock Spring – Jeep Compass / Patriot MK (2007–2018) This OEM-style clock spring assembly restores airbag connectivity, horn function, and steering wheel button control. Designed for direct replacement in Jeep MK platforms with or without Electronic Stability Control (ESC). Key Features OEM reference: 56046534AI / 5156106AF / 68339336AA Material: Heat-resistant ABS + copper contact points Multi-layer ribbon cable – tested for 100,000+ rotations Supports airbag, horn, cruise control, and audio buttons Direct-fit replacement – plug & play Fitment Compatibility Jeep Compass MK: 2007–2017 Jeep Patriot MK: 2007–2017 Also fits: Wrangler JK (2007–2018) Grand Cherokee WK/WH (2008–2010) Commander XK/XH (2008–2010) Liberty / Cherokee KK (2008–2012) Journey JC (2008–2010) Caliber PM (2007–2012) Nitro KA (2007–2011) Avenger JS (2007–2014) Chrysler 200 JS (2011–2014) Sebring JS (2007–2010) Note: Compatible with vehicles equipped with or without ESC. Verify part number and connector type before purchase. Package Includes 1 x Steering Wheel Clock Spring Assembly Installation Notes Disconnect battery before installation Center steering wheel and lock column before removal Calibrate steering angle sensor if applicable Shipping & Warranty Free shipping within USA & Australia Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

EGR Delete Block-Off Plate Kit – Ford F-Series / Ranger / Bronco (1983–1997) This CNC-machined EGR delete kit eliminates the exhaust gas recirculation system on select Ford engines, improving throttle response and reducing carbon buildup. Designed for off-road and race applications only. Key Features Material: Aircraft-grade 6061-T6 billet aluminum Finish: Precision CNC cut – warp-resistant and corrosion-proof Includes: 1 × EGR block-off plate, 1 × high-temp gasket, 2 × stainless steel pan-head bolts Function: Seals EGR port on throttle body or intake manifold Design: Direct bolt-on – no welding or tuning required Fitment Compatibility Ford F-150 / F-250 / F-350: 1983–1997 | 4.9L (300), 5.0L (302), 5.8L (351 Windsor) Ford Ranger / Bronco: 1983–1997 | V6 / V8 platforms Also Fits: Mustang, Taurus, E-Series Vans, Lincoln Mark VII, Mercury Cougar, and more Note: Not compatible with VGT turbo systems or electronic EGR modules Installation Notes Clean EGR port and mating surface before installation Use included gasket and bolts – torque to factory spec No ECU tuning required Estimated install time: 20–30 minutes ⚠️ Legal Disclaimer This product is intended for off-road or closed-course competition use only Not compliant with EPA or CARB emissions standards Use on public roads may violate federal or state laws Restore Performance & Reliability Improves Airflow: Eliminates EGR restriction in intake path Reduces Carbon Buildup: Keeps throttle body and intake cleaner Enhances Throttle Response: Improves low-end torque and acceleration Durable Construction: Resists warping, corrosion, and heat fatigue

EGR Delete + High Flow Intake Elbow Kit – 6.6L LLY Duramax This EGR delete and intake elbow kit is designed for 2004–2005 GM trucks equipped with the 6.6L LLY Duramax diesel engine. It replaces restrictive factory EGR components and improves airflow, throttle response, and turbo spool-up. Key Benefits Eliminates EGR flow for cleaner combustion Improves throttle response and turbo efficiency High-flow intake elbow with rubber seal (O-ring) Includes exhaust block-off and coolant reroute hose Nickel-plated steel components for corrosion resistance Fitment Compatibility GMC Sierra 2500HD / 3500HD – 6.6L LLY Duramax (May 2004–2005) GMC Topkick 4500 / 5500 – 6.6L LLY Duramax (2004–2005) What's Included 1 x High Flow Intake Elbow Tube 1 x Rubber Seal (O-ring) 1 x Nickel-Plated Steel Exhaust Block-Off Plate 1 x Coolant Hose (430mm / 17") 2 x Hose Clamps 1 x M10 x M20 Hex Head Bolt 2 x M8 x 30mm Allen Bolts 2 x M10 x 30mm Hex Bolts 2 x M8 x 20mm Hex Bolts Notes Only compatible with LLY Duramax engines (VIN “2” or “D”) Not for LB7 or LBZ engines – confirm VIN before ordering For off-road or race use only – not legal for highway use in emissions-regulated areas No instructions included – professional installation recommended Restore Performance & Reliability This kit helps eliminate common EGR-related issues such as clogged intake manifolds, excessive soot buildup, and poor throttle response. Ideal for towing, off-road, or performance builds.

EGR Valve & Cooler Delete Kit – 6.6L L5P Duramax This EGR delete kit is designed for 2017–2019 GMC trucks equipped with the 6.6L L5P Duramax diesel engine. It removes the EGR valve and cooler to improve airflow, reduce soot buildup, and enhance turbocharger response. Key Benefits Eliminates EGR-related restrictions and soot accumulation Improves turbo spool-up and throttle response Recirculates coolant more efficiently than stock EGR system Billet aluminum construction with nickel-plated steel flanges Includes high-temp silicone hoses and zinc-coated hardware Fitment Compatibility GMC Sierra 2500HD / 3500HD – 6.6L L5P Duramax (2017–2019) What's Included Billet aluminum block-off plates Nickel-plated steel flanges Stainless steel dipstick tube bracket High-temp silicone coolant hoses Zinc-coated mounting hardware Precision-fit O-rings Notes Not compatible with Cab & Chassis models Requires DPF-delete capable tuner to prevent CEL/DTC codes For off-road or race use only – not legal for highway use in emissions-regulated areas Installation time: approx. 2 hours with basic hand tools Boost Reliability & Performance Removing the EGR system helps prevent intake clogging, improves combustion efficiency, and enhances turbocharger performance. Ideal for off-road builds and towing applications.

Engine Valve Rocker Arm Set – Ford 6.4L Powerstroke (2008–2010) This 4-piece rocker arm set is engineered for Ford’s 6.4L Powerstroke diesel engines, featuring dual intake and exhaust configuration for optimal valve timing and reduced friction. Ideal for restoring top-end performance and reliability. Key Features OEM Reference: 8C3Z6A588A / 8C3Z6564D / 8C3Z6564C / 8C3Z6A588B Material: Forged steel with roller bearing design Finish: Anti-rust coating – heat & wear resistant Configuration: Dual intake & exhaust rocker arms Function: Restores valve lift accuracy, reduces wear Fitment Compatibility Ford Super Duty: F250 / F350 / F450 / F550 Years: 2008–2010 Engine: 6.4L OHV V8 Powerstroke Diesel – VIN Code “P” Note: Compatible with hydraulic lifters and factory rocker arm carrier Package Includes 4 x Engine Valve Rocker Arms (Dual Intake & Exhaust) Installation Notes Direct-fit replacement – no machining required Torque to factory spec using OEM service manual Recommended: Replace pushrods and inspect lifters during installation Shipping & Warranty Free shipping within USA Estimated delivery: Mon, Sep 29 – Thu, Oct 2 30-day return policy 2-year product guarantee

Range Technology AFM Disabler RA003 – Plug & Play for GM V6/V8 This AFM disabler module by Range Technology instantly disables Active Fuel Management (AFM) on GM vehicles equipped with V6 or V8 engines. Simply plug it into your OBD-II port and enjoy full-time power without cylinder deactivation. Key Benefits Eliminates AFM shuddering and cylinder dropouts Improves throttle response and exhaust tone Plug & play – no tools or programming required Safe and reversible – unplug to restore factory settings Ideal for towing, off-road, and heavy load conditions Fitment Compatibility Compatible with GM vehicles equipped with AFM (Active Fuel Management) systems: Chevrolet Silverado / Suburban / Tahoe / Avalanche (2007–2020) GMC Sierra / Yukon / Yukon XL / Denali (2007–2020) Cadillac Escalade / CTS / XT5 / XTS / SRX (2004–2019) Buick Enclave / LaCrosse / Rainier / Regal GS (2005–2018) Pontiac G8 / Grand Prix (2005–2010) Pontiac Torrent / Montana – select V6/V8 models with AFM Saturn Outlook / Aura XR – equipped with 3.6L AFM V6 Hummer H2 – 6.0L/6.2L V8 with AFM; H3 – only 5.3L V8 supports AFM Isuzu Ascender – 5.3L V8 models with AFM What's Included 1 x Range Technology AFM Disabler RA003 Quick-start guide Notes Only use if valvetrain is in good condition Unplug to revert to factory AFM settings Not a tuning device – does not alter ECU programming Why Disable AFM? AFM systems deactivate cylinders to improve fuel economy, but often cause vibration, oil consumption, and reduced performance. This disabler keeps all cylinders active for smoother driving and better power delivery.

EGR Valve Blanking Plate – MK4 VW 1.9TDI / 2.0TDI This EGR blanking plate kit is designed for 1999.5–2003 MK4 VW platforms equipped with 1.9TDI or 2.0TDI diesel engines. It blocks the EGR valve ports to eliminate soot buildup, improve airflow, and enhance turbo response for off-road diesel performance. Key Benefits Eliminates EGR-related restrictions and carbon deposits Improves throttle response and intake efficiency Reduces soot buildup in intake manifold Made from corrosion-resistant steel for durability Simple bolt-on installation – no cutting or welding required Fitment Compatibility 1999.5–2003 VW Golf MK4 – 1.9TDI / 2.0TDI 1999.5–2003 VW Jetta MK4 – 1.9TDI / 2.0TDI 1999.5–2003 VW Beetle – 1.9TDI 1999.5–2003 VW Bora / Passat – 1.9TDI / 2.0TDI Also fits select Audi, Skoda, and SEAT 1.9TDI / 2.0TDI platforms ⚠️ For off-road use only. Not legal for highway use in emissions-regulated areas What's Included 2x Steel EGR blanking plates Notes Brand new components – precision cut for exact fit Professional installation recommended No gaskets or bolts included – reuse OEM hardware Ships from US warehouse with free shipping Boost Reliability & Performance Removing the EGR flow path helps prevent intake clogging, improves combustion efficiency, and enhances turbocharger performance. Ideal for off-road builds, TDI tuning, and long-term engine health.

FeaturesCombo 2-piece LED pod light kit and tow hitch mounting bracketExclusively designed custom mounting brackets allow for a direct and easy bolt-on installation without any drilling, cutting or modification requiredThe tow hitch can clamp around most 2.5" inner openings Class 1, Class 2 tow hitches and some 3" inner opening heavy duty tow hitches as wellEach LED pod light is lowered by 4 pieces of xenon white 4W LED XP-E Emitters, giving you a total of 16WNotePlease make sure you have enough clearance space for installation! You must have at least 18mm (1.8cm/0.7in) of surrounding gap between the tow hitch, bumper, and metal plates in order to fit the tow hitch bracket.

Repair garages and middlemen can contact us to get wholesale prices   Product Description 100% Brand New, Never been used. Made of high quality material Increases fuel economy Reduces turbo lag Increases throttle response Professional Installation is Highly Recommended (No Instruction Included) Fitment 08-10 FORD F-250 SUPER DUTY 6.4L 391ci OHV V8 POWERSTROKE DIESEL TURBO, VIN "R" 08-10 FORD F-350 SUPER DUTY 6.4L 391ci OHV V8 POWERSTROKE DIESEL TURBO, VIN "R" 08-10 FORD F-450 SUPER DUTY 6.4L 391ci OHV V8 POWERSTROKE DIESEL TURBO, VIN "R" 08-10 FORD F-550 SUPER DUTY 6.4L 391ci OHV V8 POWERSTROKE DIESEL TURBO, VIN "R" 10-10 FORD F-550 6.4L 6400cc 391ci OHV V8 POWERSTROKE DIESEL TURBO, VIN "R" Package Includes 1pc Exhaust Block-Off Plate 1pc Exhaust Gasket 2pc Coolant Line Plugs 1pc Brass Barbed Hose Connector 1pc Stand-Off Spacer 4pc M10-1.25 x 40 Hex Head Bolts (Exhaust Manifold) 2pc M10-1.25 x 20 Hex Head Bolts 4pc M6-1.25 x 25 Flanged Hex Head Bolts 2pc Plastic Hose Routing Clips 1pc Intake Elbow In addition, we are looking for long-term cooperative auto parts agents. We are mainly engaged in auto parts of American models, lawn mower parts, ATV, UTV parts, RV parts, ship parts and tool goods. If you need other products, please contact us and we will give you unexpected prices.

EGR Plug Kit – Stage 2 for Cummins ISX CM871 (2007–2010) This EGR plug kit is engineered for heavy-duty trucks equipped with the Cummins ISX CM871 engine. Designed for off-road use, it removes the EGR valve and cooler to improve airflow, reduce soot buildup, and enhance engine reliability. Key Benefits Eliminates EGR-related restrictions and soot accumulation Improves combustion efficiency and turbo response Includes high-temp graphite gasket for leak-free sealing Durable 6061 billet aluminum and 304 stainless steel construction Precision CNC-machined for perfect fitment Fitment Compatibility 2007–2010 Cummins ISX CM871 Engine Fits Volvo, Peterbilt, Mack, International, Freightliner, Kenworth ⚠️ For off-road use only. Not legal for highway use in emissions-regulated areas What's Included 2x Billet aluminum block-off plates 2x Stainless steel block plates 2x Stainless steel plug fittings 1x High-temp graphite gasket 4x O-rings Notes 100% brand new components Installation requires basic hand tools No calibration or tuning required Ships from US warehouse with free shipping Boost Reliability & Performance Removing the EGR system helps prevent intake clogging, improves combustion efficiency, and enhances turbocharger performance. Ideal for off-road fleets, performance builds, and diesel owners seeking long-term engine health.

EGR Blanking Plate Kit – Land Rover 2.7 TDV6 This complete EGR blanking kit is designed to eliminate the exhaust gas recirculation system on early-model Land Rover TDV6 engines. Ideal for off-road use or performance builds, it improves throttle response and reduces carbon buildup. Key Features Material: CNC-machined aluminum alloy with plated finish Sealing: Includes 4 high-temp O-rings for leak-free installation Design: Smooth surface, burr-free, corrosion-resistant Function: Blocks EGR flow, improves turbo efficiency and combustion Fitment Compatibility Land Rover Discovery 3: 2004–2006 | 2.7L TDV6 | VIN 5A / 6A Range Rover Sport: 2005–2006 | 2.7L TDV6 | VIN 5A / 6A Note: For 2007+ VIN 7A onward, ECU remap required to disable EGR fault codes Package Includes 4 × CNC Aluminum Blanking Plates 4 × High-Temp O-Rings Installation Notes Direct bolt-on installation using 8mm socket No software changes required for pre-2007 models Post-2007 models require ECU programming to avoid fault light Legal Disclaimer For off-road or race-track use only Not legal for highway use in emissions-regulated areas User assumes full responsibility for installation and use Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 2-year product guarantee

Rear A/C Block-Off Kit – GM SUV Platforms (2000–2013) This engine bay block-off kit allows you to disable the rear air conditioning system while maintaining full functionality of the front A/C. Ideal for vehicles with leaking rear lines or evaporators, this kit eliminates the need for costly rear system repairs. Key Features Material: CNC-machined aluminum fittings Includes: High-pressure & low-pressure sealing washers + mounting bolts Install Location: Engine compartment – no need to access rear evaporator Function: Blocks rear A/C lines, preserves front A/C operation Application: Ideal for rear line leaks, evaporator failures, or off-road conversions Fitment Compatibility Chevrolet: Suburban / Tahoe (2000–2013) GMC: Yukon / Yukon XL (2000–2013) Cadillac: Escalade / Escalade ESV (2002–2013) Note: Compatible with peanut/block-style rear line fittings. Does not affect front A/C performance. Package Includes 2 × CNC Aluminum Block-Off Fittings 2 × Sealing Washers (High & Low Pressure) 2 × Mounting Bolts Installation Notes Disconnect rear A/C lines at engine bay junction Install block-off fittings using included washers and bolts No need to remove rear evaporator or modify dashboard controls Recommended: Professional installation to ensure leak-free seal Legal Disclaimer This kit modifies factory HVAC routing and may affect warranty coverage Intended for off-road, fleet, or repair use where rear A/C is no longer needed User assumes full responsibility for installation and use Shipping & Warranty Free shipping within USA Estimated delivery: Tue, Sep 30 – Fri, Oct 3 30-day return policy 2-year product guarantee