Search results for "transmission components":

Magnetic Ride Front Strut for GMC Sierra 1500 This Magnetic Ride front shock absorber strut is engineered to restore factory-level suspension performance in 2014–2019 GMC Sierra 1500 models. Featuring a complete coil-over assembly, it ensures smooth handling, precise damping, and long-term reliability. Compatible with GM part numbers 84977478 and ACDelco 580-1108, this strut is ideal for vehicles equipped with Magnetic Ride Control systems. Key Benefits Direct-fit replacement for GM 84977478, 84061228, ACDelco 580-1108 Supports Magnetic Ride Control (MRC) suspension systems Includes coil spring and mounting hardware Improves ride stability, comfort, and shock absorption Fitment Compatibility GMC Sierra 1500 (2014–2019) What's Included 2 x Front Strut Assemblies with Coil Springs 4 x Mounting Screws with Nuts Notes Only compatible with vehicles equipped with Magnetic Ride Control Verify fitment using VIN if unsure Professional installation recommended Boost Suspension Performance Designed to work seamlessly with GM’s Magnetic Ride Control system, this strut improves damping response and reduces body roll during cornering and towing. Quick Installation for Instant Results Pre-assembled and ready to install, this front strut requires no special tools. Simply remove the old unit and bolt this in for immediate ride quality improvement. Durable OEM-Grade Construction Built from high-strength materials and tested to OEM standards, this strut offers long-lasting performance and reliability under all driving conditions.

Tucked Engine Harness for Honda/Acura K-Series K20/K24 Swap This K-Series tucked engine harness is designed for Honda and Acura K-swap applications, including Integra, CRX, and EG chassis. It simplifies your engine bay layout while ensuring reliable connectivity for K20 and K24 conversions. Key Benefits Clean tucked design for minimal engine bay clutter High-temp plastic and rubber insulation for durability Direct-fit connectors for K20/K24 sensors and ECU Compatible with multiple Honda/Acura chassis platforms Fitment Compatibility Honda Integra K-Swap (EG chassis) Honda CRX K-Swap Acura Integra K20/K24 conversion Not compatible with Civic chassis What's Included 1 x Tucked Engine Wire Harness – K-Series Notes Designed for off-road or motorsport use Professional installation recommended Estimated install time: 60–90 minutes Engine Bay Simplification Perfect for K-swap builds focused on performance and aesthetics. This harness eliminates unnecessary wiring clutter and ensures clean routing for sensors, injectors, and ECU connections.

EGR Delete / Block Off Kit for Chevy Silverado & Suburban This 3-piece EGR delete block off kit is designed to eliminate the exhaust gas recirculation system on select GMC Yukon models with 4.3L or 5.7L CPI Vortec engines. By removing the EGR pathway, this kit improves intake airflow, reduces carbon buildup, and enhances throttle response. Key Benefits Eliminates EGR flow for cleaner combustion Improves engine performance and airflow Reduces carbon deposits and intake contamination Simple bolt-on installation Fitment Compatibility GMC Yukon (1996–2009) What's Included 1 x EGR block off plate 1 x intake plug 1 x exhaust block off plate Notes For off-road or racing use only May trigger check engine light if not tuned Professional installation recommended Restore Engine Efficiency By removing the EGR system, this kit helps restore lost horsepower and ensures cleaner combustion, especially on older CPI Vortec engines.

KIT INCLUDES:Front:3" Front Lift Kit with hardware (includes upper and lower strut spacers to reduce stress on front suspension)Rear:2" Rear Tapered BlocksU bolts and hardware FITS:2007-2020 Chevrolet Silverado 1500 2WD 4WD2007-2020 GMC Sierra 1500 2WD 4WD2007 New Body Style ONLY Not Recommended for Trail Boss/AT4 models or models with Air Ride/Auto-Leveling options

Description:100% Brand New Items, Never Used Or InstalledProfessional Installation is Highly RecommendedNo Instruction IncludedMuffler and Cat DELETE Pipe Kits:Made from SUS409 Steel4" Diameter Exhaust PipeMandrel Bent 409 Steel ExhaustStraight Pipe SystemProduces Aggressive Performance SoundIncreases HorsepowerIncreases TorqueIncreases Fuel EfficiencyBolt-On kit w/ All Necessary PiecesPackage includes:2X Muffler Delete Pipe1X Clamp2X BoltsShown in the Picture AboveFitment: 2008-2010 Ford 6.4L Powerstroke Diesel F250 F350 F450 F550

EGR Delete / Block Off Kit for Chevy Silverado & Suburban This 3-piece EGR delete block off kit is designed to eliminate the exhaust gas recirculation system on select Acura SLX GM 4.3L Vortec engines. By removing the EGR pathway, this kit improves intake airflow, reduces carbon buildup, and enhances throttle response. Key Benefits Eliminates EGR flow for cleaner combustion Improves engine performance and airflow Reduces carbon deposits and intake contamination Simple bolt-on installation Fitment Compatibility  Acura SLX (1996–1999) What's Included 1 x EGR block off plate 1 x intake plug 1 x exhaust block off plate Notes For off-road or racing use only May trigger check engine light if not tuned Professional installation recommended Restore Engine Efficiency By removing the EGR system, this kit helps restore lost horsepower and ensures cleaner combustion, especially on older CPI Vortec engines.

Front Air Suspension Strut – Rolls-Royce Ghost RR4 / Wraith RR5 (2010–2019) This OEM remanufactured front air suspension strut is designed for Rolls-Royce Ghost RR4, Ghost EWB, and Wraith RR5 models equipped with ADS (Adaptive Damping System). It restores factory ride height, damping control, and air spring performance. Key Benefits Remanufactured using original OE shock body New air bladder, seals, connectors, and wiring harness Aluminum top mount and bottom fork for secure fitment Compatible with ADS (Adaptive Damping System) Backed by 2-year warranty and 30-day return policy Fitment Compatibility Rolls-Royce Ghost RR4 (2010–2019) Rolls-Royce Ghost EWB RR4 (2012–2019) Rolls-Royce Wraith RR5 (2013–2019) Note: Compatible with vehicles equipped with pneumatic suspension and ADS system Replaces OEM Part Numbers Front Left: 37106862551, 37106864533, 37106892845, 37106892855, 37106864531, 37106868823, 37106888033, 37106892859, 37116851607, 37116850227 Front Right: 37106864534, 37106862144, 37106864532, 37106868824, 37116850228, 37106862552, 37106888034, 37106892860, 37106892846, 37106892856, 37116851608 What's Included 1 x Front Air Suspension Strut – Fits Left or Right Notes Fits front axle – left or right side Does not include mounting bolts or ADS sensors Professional installation recommended Estimated install time: 60–90 minutes Suspension System Restoration Ideal for resolving air leaks, ADS error codes, or front-end instability. This strut restores OEM damping response and ensures safe, smooth driving under all road conditions.

Airbag Clock Spring – Heated Steering Wheel Sensor This airbag clock spring is a direct replacement for GM trucks and SUVs equipped with heated steering wheels. Compatible with Silverado 1500, Tahoe, and Suburban models from 2014 to 2017, it restores proper airbag and steering wheel sensor functionality. Key Benefits Restores airbag and steering wheel sensor communication Compatible with heated steering wheel systems OEM-grade ABS plastic for durability and fit Plug-and-play installation with OE-style connectors Tested for performance and reliability Fitment Compatibility Chevy Silverado 1500 – LS, LT, LTZ, High Country, Custom, WT, SSV (2014–2017) Chevy Tahoe / Suburban – LS, LT, LTZ, Premier, PPV, SSV (2015–2017) ⚠️ Only compatible with models equipped with heated steering wheels What's Included 1x Airbag Clock Spring (OEM #23381967) Notes Direct replacement for GM part number 23381967 Check OEM compatibility before ordering Installation requires basic hand tools 30-day return policy and 2-year warranty included Restore Safety & Sensor Precision Replacing a faulty clock spring restores critical communication between your steering wheel controls, heated wheel sensor, and airbag system. Ideal for GM owners seeking reliable OEM-grade replacements with plug-and-play simplicity.

APPLICATION:FITS 2007-2020 CHEVY TAHOE 2WD 4WDFITS 2007-2020 CHEVY SUBURBAN 1500 2WD 4WD (6-LUG)WILL NOT WORK ON VEHICLES EQUIPPED WITH AIRBAG / AIR-RIDE / AUTOMATIC LOAD-LEVELING SUSPENSION.DESCRIPTION:Includes 2 Front Top Billet Aluminum Strut SpacersIncludes 2 Front Bottom Delrin Strut SpacersIncludes 2 Rear High Density Delrin Spring SpacersIncludes 2 Rear Shock Mount ExtendersProprietary Protective Coating to Prevent Oxidation, Corrosion & RustThe High Density Delrin Spacers are built to endure Extreme corrosion and rust resistance.Delrin is the recommended option for areas with Direct Impact to high levels of fluids. (water, mud, snow, etc)Precision CNC machined for perfect fitmentAllows for Installation of Plus Sized TiresIncludes high-strength additional hardware required for install.Simple Instructions for Easy, Do It Yourself Installation

Product Description 100% Brand new,never been used Complete EGR Delete Kit for 6.7L Powerstroke Completely Replaces EGR System, No Other Parts Required CNC Machined Billet Aluminum and Stainless Steel New coolant hose instead of plugs Completes Coolant Circuit Professional installation is highly recommend.(No Instruction Included) Fitment2015-2016 Ford 6.7L Powerstroke Diesel Package includes 1X Exhaust Manifold Block-Off Plate,PRE-Welded For An EGT Sensor 1X Intake Block-Off Plate 1X Coolant Block-Off Plate 1X 1" Stainless Hose Clamp 1X Brass Straight Barbed Fitting 1X Vaccum Cap 1X Pressure Sensor Bracket 1X Pressure Sensor Bracket Hardware 1X Coolant Hose 2X 3/4" Coolant Caps 3X 8mm Bolts 3X 8mm Flat Washers 3X Zip-Ties​ NOTE: Not for sale or use on any pollution controlled vehicle in the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Please check your local, state, and federal laws before purchasing! This Product is designed and intended solely for legally-organized and sanctioned, closed- course, off-road competition use and is not for use on public streets, roads or highways. This Product is capable of disabling the emissions system on some vehicles. Emission delete products are for the above-mentioned uses only—or where emissions equipment is not required by law. Use on public streets, roads or highways is a violation of federal and certain state(including California) and local environmental laws. Your vehicle will not pass emissions testing if the emissions system has been disabled By purchasing our delete kit, you are also (a) certifying that your use of this Product will at all times be limited to lawful off-road competition uses consistent with the terms of this Disclaimer and (b) consenting to the disclosure of your identity to any governmental entity responsible for regulating emissions and/or enforcing emissions laws In the event that the buyer accepts but subsequently determines that he/she will not be able to comply with the terms of this disclaimer, the buyer may promptly return this product, in a new and unused condition, with a dated proof of purchase, to the place of purchase within ten (10) days from date of purchase for a full refund

Upgraded PCV Valve – BMW N54 Twin Turbo Platform This CNC-machined aluminum PCV valve is designed to replace the weak factory plastic unit found in BMW N54 engines. It improves crankcase pressure control, reduces oil consumption, and eliminates boost leaks under high load. Key Features Material: 6061-T6 aircraft-grade aluminum Finish: Hard anodized silver – corrosion and heat resistant Design: One-way check valve – prevents pressurized air from entering crankcase Function: Replaces OEM PCV valve – improves reliability and performance Includes: 1 × PCV valve (cap cover optional) Fitment Compatibility BMW 135i: 2008–2010 | E82 / E88 BMW 335i: 2007–2013 | E90 / E91 / E92 / E93 BMW 535i: 2008–2010 | E60 / E61 BMW Z4: 2009–2016 | E89 sDrive35i / sDrive35is BMW X6: 2008–2014 | E71 xDrive35i BMW 740i / 740Li: 2011–2012 | F01 / F02 Note: Only compatible with N54 twin turbo engines. Not suitable for N55, B58, N20, or other platforms. Package Includes 1 × Upgraded PCV Valve – CNC Aluminum Installation Notes Apply a small amount of clean engine oil to threads before installation Do not overtighten – may damage valve cover threads Estimated install time: 5–10 minutes Restore Performance & Reliability Eliminates Boost Leaks: Prevents turbo pressure from entering crankcase Reduces Oil Consumption: Minimizes blow-by and oil vapor intrusion Improves Engine Longevity: Protects against detonation and carbon buildup Durable Construction: CNC aluminum resists heat, pressure, and corrosion

Front Coil Spring Shock Absorber Strut Assembly – OEM-Compatible This complete front strut assembly includes coil spring, shock absorber, and upper mount pre-installed. Designed for Cadillac Escalade / ESV / EXT and compatible GM platforms, it restores ride comfort and handling without the need for spring compression tools. Key Benefits Pre-assembled coil spring and strut – ready to install High-strength steel body with corrosion-resistant finish Oil-filled hydraulic damping for smooth ride Direct-fit replacement for OEM units Fitment Compatibility GMC Sierra 1500 (2007–2014) – Excludes electronic suspension & 22" wheels Chevrolet Silverado 1500 (2007–2013) Chevrolet Avalanche (2007–2013) Chevrolet Suburban 1500 (2007–2014) Chevrolet Tahoe (2007–2019) GMC Yukon / Yukon XL 1500 (2007–2019) Cadillac Escalade / ESV / EXT (2007–2014) Replaces OEM Part Numbers 15886465, 15909491, 15918522, 15909191 15911938, 15939374, 19209555, 19300031 19353945, 19353949, 20810270, 25845446 25845438, 25845447, 25888675, 25888683 25888684, 540358, 580280, 580287 580304, 580375, SK-2806, SK-2954 What's Included 1 x Front Coil Spring Strut Assembly (Left or Right) Notes Not compatible with electronic suspension systems Not compatible with vehicles equipped with 22-inch wheels No special tools required for installation Estimated install time: 60–90 minutes Suspension Restoration Ideal for resolving front-end sagging, poor handling, or excessive bounce. This strut restores factory ride height and damping performance, ensuring safe and comfortable driving.

Product Description： 100% Brand New, Never been used. Fits Ford 6.0L diesel engines This kit is a high flow type intended for off road use Professional Installation is Highly Recommended (No Instruction Included) Package includes：  1X EGR Delete Kit 180 Degree Stainless Steel Coolant Tube Stainless Steel Up-pipe assembly Billet EGR block-off with O-Ring 0.75" Silicone Hose 2X Worm drive hose Clamps 4X Serrated Flange Nuts - 5/16 NC 2X Six Point Bolts - 5/16 NC x 2" 2X Six Point Bolts - 5/16 NC x 1.25" 1X Spring Upgrade Kit 1X Silicone Sealant     Fitment： 2003 2004 2005 2006 2007 Ford F250 F350 F450 F550 Excursion and 2005 2006 2007 2008 2009 2010 E-Series Vans ​     NOTE： Not for sale or use on any pollution controlled vehicle in the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Please check your local, state, and federal laws before purchasing! This Product is designed and intended solely for legally-organized and sanctioned, closed- course, off-road competition use and is not for use on public streets, roads or highways. This Product is capable of disabling the emissions system on some vehicles. Emission delete products are for the above-mentioned uses only—or where emissions equipment is not required by law. Use on public streets, roads or highways is a violation of federal and certain state(including California) and local environmental laws. Your vehicle will not pass emissions testing if the emissions system has been disabled By purchasing our delete kit, you are also (a) certifying that your use of this Product will at all times be limited to lawful off-road competition uses consistent with the terms of this Disclaimer and (b) consenting to the disclosure of your identity to any governmental entity responsible for regulating emissions and/or enforcing emissions laws In the event that the buyer accepts but subsequently determines that he/she will not be able to comply with the terms of this disclaimer, the buyer may promptly return this product, in a new and unused condition, with a dated proof of purchase, to the place of purchase within ten (10) days from date of purchase for a full refund

Magnetic Ride Front Strut for GMC Yukon Denali This front shock absorber strut with Magnetic Ride Control is designed to restore factory-level ride comfort and handling in 2015–2019 GMC Yukon Denali models. Featuring a complete coil-over assembly, it ensures smooth suspension response and precise fitment. Compatible with OEM part numbers GM 84977478 and ACDelco 580-1108, this strut is ideal for vehicles equipped with Magnetic Ride Control systems. Key Benefits Direct-fit replacement for GM 84977478, 84061228, ACDelco 580-1108 Supports Magnetic Ride Control (MRC) suspension systems Includes coil spring and mounting hardware Improves ride stability, comfort, and shock absorption Fitment Compatibility GMC Yukon Denali (2015–2019) GMC Yukon XL Denali (2015–2019) Cadillac Escalade / Escalade ESV (2015–2019) Chevrolet Tahoe / Suburban (2015–2019) GMC Sierra 1500 Denali (2014–2019) What's Included 2 x Front Strut Assemblies with Coil Springs Pre-installed air fittings and mounting bolts Notes Only compatible with vehicles equipped with Magnetic Ride Control Verify fitment using VIN if unsure Professional installation recommended Boost Suspension Performance Designed to work seamlessly with GM’s Magnetic Ride Control system, this strut improves damping response and reduces body roll during cornering and towing. Quick Installation for Instant Results Pre-assembled and ready to install, this front strut requires no special tools. Simply remove the old unit and bolt this in for immediate ride quality improvement. Durable OEM-Grade Construction Built from high-strength materials and tested to OEM standards, this strut offers long-lasting performance and reliability under all driving conditions.

3" Front Leveling Lift Kit – Dodge RAM 1500 4WD (2002–2005) This adjustable torsion key leveling kit lifts your RAM 1500’s front suspension by up to 3 inches, eliminating factory rake and improving clearance for larger tires. Built from forged steel with a corrosion-resistant powder coat, it maintains factory ride quality and installs in under 2 hours. Key Features Material: CNC-forged steel – powder-coated black Design: Indexed torsion keys – adjustable from 1" to 3" Lift Height: Raises front by up to 3" (actual lift depends on adjustment) Function: Levels front-to-rear stance, improves approach angle Compatibility: Reuses factory shocks – no strut disassembly required Fitment Compatibility Dodge RAM 1500: 2002–2005 | 4WD only | Torsion bar suspension Note: Not compatible with Mega Cab, TRX, Rebel, or Air Ride suspension models Package Includes 2 × Adjustable Torsion Keys – Forged Steel Installation Hardware Torsion key unloading tool sold separately Installation Notes Requires torsion key unloading tool for safe installation Basic hand tools only – install time: 1.5–2 hours Professional alignment recommended after installation Restore Performance & Reliability Improves Stance: Eliminates factory rake for leveled appearance Enhances Clearance: Supports up to 33–35" tires Preserves Ride Quality: Maintains factory suspension geometry Durable Construction: Resists rust, corrosion, and compression over time